Changes

* At the first stage, the loom may have had shed sticks and heddles (Refer Fig.2).  

* At the first stage, the loom may have had shed sticks and heddles (Refer Fig.2).  

* Next came the introduction of the reed that maintained even spacing and tension and served to comb the warp ends in course of weaving; As also the shaft, treadle and, perhaps, the barrell dobby (Refer Fig.3).

* Next came the introduction of the reed that maintained even spacing and tension and served to comb the warp ends in course of weaving; As also the shaft, treadle and, perhaps, the barrell dobby (Refer Fig.3).

[[File:Barrel dobby.PNG|thumb|'''Fig. 3. Barrel dobby mechanism''': The loom used for weaving Karvathi Kati dhoti. Photographed at Suraj Mela, 1987. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n401/mode/2up P.363], Fig.5.</ref>]]The loin or body tension loom is used in the northeastern part of the country. It is a very early loom type used extensively in East and Southeast Asia in which the weaver regulates tension by moving backwards or forwards as required in course of weaving. This movement releases the warp threads and also facilitates the separation of the sheds (Refer Fig. 4, 5 & 6).

[[File:Barrel dobby.PNG|thumb|'''Fig. 3. Barrel dobby mechanism''': The loom used for weaving Karvathi Kati dhoti. Photographed at Suraj Mela, 1987. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n401/mode/2up P.363], Fig.5.</ref>]][[File:Loinloom 1.PNG|left|thumb|'''Fig. 4. Loin loom and loom parts:''' 1. Bamboo which serves the same purpose as the warp beam in a horizontal loom. 2. Thin bamboo rod which acts as a lease rod. 3. Bamboo shod stick. 4. Thin bamboo heddle stick which holds the yarn heddles. 5. Wooden beater. 6. Wooden rods which serve the same purpose as the cloth beam in a horizontal loom. 7. Leather back-strap. 8. The continuous warp. 9. The woven fabric. 10. Mat spread on the floor on which the weaver sits. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n407/mode/2up P.368], Fig.6a.</ref>]]The loin or body tension loom is used in the northeastern part of the country. It is a very early loom type used extensively in East and Southeast Asia in which the weaver regulates tension by moving backwards or forwards as required in course of weaving. This movement releases the warp threads and also facilitates the separation of the sheds (Refer Fig. 4, 5 & 6).

[[File:Loinloom 1.PNG|left|thumb|'''Fig. 4. Loin loom and loom parts:''' 1. Bamboo which serves the same purpose as the warp beam in a horizontal loom. 2. Thin bamboo rod which acts as a lease rod. 3. Bamboo shod stick. 4. Thin bamboo heddle stick which holds the yarn heddles. 5. Wooden beater. 6. Wooden rods which serve the same purpose as the cloth beam in a horizontal loom. 7. Leather back-strap. 8. The continuous warp. 9. The woven fabric. 10. Mat spread on the floor on which the weaver sits. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n407/mode/2up P.368], Fig.6a.</ref>]]

[[File:Change of Shed 1.PNG|thumb|'''Fig. 5. Change of shed in loin loom 1:''' 1. Lease rod. 2. Bamboo shod stick. 3. Heddle rod. 4. Yarn to make the heddle. 5. Weft. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n407/mode/2up P.369], Fig.6b.i.</ref>]]

[[File:Change of Shed 1.PNG|thumb|'''Fig. 5. Change of shed in loin loom 1:''' 1. Lease rod. 2. Bamboo shod stick. 3. Heddle rod. 4. Yarn to make the heddle. 5. Weft. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n407/mode/2up P.369], Fig.6b.i.</ref>]]

The loom used for Patola (double ikat) weaving in Patan, Gujarat, receives support from above and the sides. It is bereft of a treadle mechanism. It is a single harness loom with provision for two sheds. Every alternative warp end is threaded through a half heddle. Thus the shedding arrangement is based upon the division of the warp ends into two units. The shed rod is used to form one shed and half heddles for the formation of the second. These groupings of odd and even ends interlace alternately in course of weaving. The weaving sword helps in extending each shed opening and is used for beating in the weft. The resultant weave is an even tabby (Refer Fig.7).  

The loom used for Patola (double ikat) weaving in Patan, Gujarat, receives support from above and the sides. It is bereft of a treadle mechanism. It is a single harness loom with provision for two sheds. Every alternative warp end is threaded through a half heddle. Thus the shedding arrangement is based upon the division of the warp ends into two units. The shed rod is used to form one shed and half heddles for the formation of the second. These groupings of odd and even ends interlace alternately in course of weaving. The weaving sword helps in extending each shed opening and is used for beating in the weft. The resultant weave is an even tabby (Refer Fig.7). [[File:Change of Shed 2.PNG|left|thumb|'''Fig. 6. Change of Shed in loin loom 2:''' 1. Lease rod. 2. Bamboo shod stick. 3. New position of the heddle rod. 4. Weft. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n407/mode/2up P.369], Fig.6b.ii.</ref>]]Ornamentation on the loom can be achieved by introducing variations in color while maintaining a simple tabby weave (Refer to Fig.8 for structure of tabby weave). [[File:Patola loom.PNG|thumb|'''Fig. 7. Patola Loom and parts:''' 1. Pole for fastening the loom. 2. Warp beam. 3. Ditto. 4. Stick. 5,6,7. Cross mechanism with indented stick. 8. Shed rod. 9. Pressure bar with handle. 10. Heddle rod mechanism and heddles. 11. Sword. 12. Breast beam. 13. Shuttle. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n409/mode/2up P.371], Fig.7a.</ref>]]Similar effects can be achieved by using double cloth techniques in which warp ends are manipulated at two or more levels by relevant shafts and heddles. An example of this technique may be found in the khes of Punjab. The item categorised as khes in Pakistan corresponds to the article in Fig. 9. In India, however, there appears to have been two categories, khes and majnu. Khes is a rough quality off-white or checked handloom material used as wrapper in Punjab. According to Sri D.N. Vij, Panipat Textile Handicrafts, Panipat, majnu is a double cloth with a patterning as shown in Fig. 9. 

 

 

[[File:Change of Shed 2.PNG|left|thumb|'''Fig. 6. Change of Shed in loin loom 2:''' 1. Lease rod. 2. Bamboo shod stick. 3. New position of the heddle rod. 4. Weft. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n407/mode/2up P.369], Fig.6b.ii.</ref>]]The technique was ascribed by him to Multan.  

[[File:Patola loom.PNG|thumb|'''Fig. 7. Patola Loom and parts:''' 1. Pole for fastening the loom. 2. Warp beam. 3. Ditto. 4. Stick. 5,6,7. Cross mechanism with indented stick. 8. Shed rod. 9. Pressure bar with handle. 10. Heddle rod mechanism and heddles. 11. Sword. 12. Breast beam. 13. Shuttle. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n409/mode/2up P.371], Fig.7a.</ref>]]

Items similar in patterning and technique and dated between the 12th and 16th centuries in the Dumbarton Oaks, collection, U.S.A., have been assigned an Egyptian provenance. This corresponds to the period between the Ayyubid and Mamluk dynasties thus reinforcing a Near Eastern origin for the sub- category called majnu in India  

Items similar in patterning and technique and dated between the 12th and 16th centuries in the Dumbarton Oaks, collection, U.S.A., have been assigned an Egyptian provenance. This corresponds to the period between the Ayyubid and Mamluk dynasties thus reinforcing a Near Eastern origin for the sub- category called majnu in India  

However, the double cloth technique also appears to have enjoyed an indigenous base. This is evidenced in the Deccani double coloured Pitambar sari, a silken ritual garment in which each side of the sari presents a completely different colour field. However, the multiple cloths which evolved in the Near East have been absent in the Indian tradition.

However, the double cloth technique also appears to have enjoyed an indigenous base. This is evidenced in the Deccani double coloured Pitambar sari, a silken ritual garment in which each side of the sari presents a completely different colour field. However, the multiple cloths which evolved in the Near East have been absent in the Indian tradition.

[[File:Tabby weave.PNG|left|thumb|'''Fig. 8.''' Structure of tabby weave. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n411/mode/2up P.373], Fig.8.</ref>]]

[[File:Sample of Majnu.PNG|thumb|'''Fig. 9.''' Samples of majnu. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n413/mode/2up p.374.] Fig.9b.</ref>]]

One of the characteristics of the Indian loom has been the intensive use of shafts and treadles to achieve extra warp and weft patterning. For extra warp however, an ingenious device, the barrel dobby is much in evidence today. The dobby was patented in England but its roots may well lie in shaft and peddle devices used in extra warp ornamentation as in the Paithani loom, Maharashtra.

One of the characteristics of the Indian loom has been the intensive use of shafts and treadles to achieve extra warp and weft patterning. For extra warp however, an ingenious device, the barrel dobby is much in evidence today. The dobby was patented in England but its roots may well lie in shaft and peddle devices used in extra warp ornamentation as in the Paithani loom, Maharashtra.

[[File:Sample of Majnu.PNG|thumb|'''Fig. 9.''' Samples of majnu. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n413/mode/2up p.374.] Fig.9b.</ref>]]

[[File:Shaft and peddle attachments.PNG|left|thumb|Fig. 10: Shaft and Peddle attachments. Note narrow width of border, geometrical mirror, image motifs and bobbin used. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n413/mode/2up p.374.] Fig.11b.</ref>]]

For narrow weaving as in borders, Pagris, and for cross borders, looms with multiple shafts have proved popular solutions (Refer Fig.10-11). For weaving of newar and patti, used in providing the base on bed frames and for winding around the calves of persons having to stand for long periods, variations of the fixed heddle and looms with shafts have been used. Such looms are in operation to this day in Wadhwan, Gujarat. Tablet weaving (Refer Fig.12) is used as a finishing technique for dhablas, used as shawls or as body garments in Gujarat. It also appears to have been utilised in the weaving of tapes (Refer Fig. 13) used for tying bundles of manuscripts of a religious nature.

For narrow weaving as in borders, Pagris, and for cross borders, looms with multiple shafts have proved popular solutions (Refer Fig.10-11). For weaving of newar and patti, used in providing the base on bed frames and for winding around the calves of persons having to stand for long periods, variations of the fixed heddle and looms with shafts have been used. Such looms are in operation to this day in Wadhwan, Gujarat. Tablet weaving (Refer Fig.12) is used as a finishing technique for dhablas, used as shawls or as body garments in Gujarat. It also appears to have been utilised in the weaving of tapes (Refer Fig. 13) used for tying bundles of manuscripts of a religious nature.

[[File:Shaft and peddle attachments.PNG|left|thumb|Fig. 10: Shaft and Peddle attachments. Note narrow width of border, geometrical mirror, image motifs and bobbin used. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n413/mode/2up p.374.] Fig.11b.</ref>]]

[[File:Tablet weaving apparatus.PNG|left|thumb|Fig. 12 Tablet weaving apparatus. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n415/mode/2up p.376.] Fig.13.</ref>]]

[[File:Manipulation of Peddle.PNG|thumb|Fig. 11 Manipulation of Peddles with the big toe of each foot. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n413/mode/2up p.374.] Fig.11c.</ref>]]

[[File:Manipulation of Peddle.PNG|thumb|Fig. 11 Manipulation of Peddles with the big toe of each foot. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n413/mode/2up p.374.] Fig.11c.</ref>]]

Fabrics can also be ornamented by the jamdani (Refer Fig.l4-15), slit, single and double interlock as also the dovetail tapestry techniques (Fig 16a-d, 17a-b). None of these methods of weaving involve usage of elaborate loom procedures. The investment is in terms of manual skill. Jamdani and tapestry both pre-date the introduction of the Islamic repertoire in weaves. In Jamdani, which falls under the category' of Supplementary weft inlaid, pattern ends are manually lifted with the pattern weft and ground weft positioned within the same shed (Fig. 15a-b). Major centres of Jamdani have been Dhaka, Tanda, Uppada and Paithan.

None of these methods of weaving involve usage of elaborate loom procedures. The investment is in terms of manual skill. In fact, the Jamdani and tapestry both pre-date the introduction of the Islamic repertoire in weaves.  

Slit tapestry, an early technique associated with Coptic tapestry, is found in the panja dari (Fig. 18); single and double interlock (Fig.16 b.c), occur in Kani Pashmina, to mention one example; the prime example of dovetail tapestry is the Kulu and Kinnaur body wrapper of Himachal Pradesh (Fig. 19.).

[[File:Tapes for tying manuscripts.PNG|left|thumb|Fig. 13 Tapes for tying manuscripts, possibly made in Varanasi acquired in A.D. 1885. It is double faced in reversible colour. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n415/mode/2up p.377.] Fig.14.</ref>]]

[[File:Tapes for tying manuscripts.PNG|left|thumb|Fig. 13 Tapes for tying manuscripts, possibly made in Varanasi acquired in A.D. 1885. It is double faced in reversible colour. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n415/mode/2up p.377.] Fig.14.</ref>]]

In South India where garments follow the mode of the ground fabric being fashioned in one colour with borders of another, the interlock is found at junctions where two opposing weft coloured picks are united. Since three separate shuttles are used in this category of weaving, this is also called the three shuttle technique (Fig.20).

In South India where garments follow the mode of the ground fabric being fashioned in one colour with borders of another, the interlock is found at junctions where two opposing weft coloured picks are united. Since three separate shuttles are used in this category of weaving, this is also called the three shuttle technique (Fig.20).

[[File:Structure of Jamdani fabric.PNG|thumb|Fig. 14. Structure of Jamdani fabric. 1. Warp, 2. Weft, 3. Supplementary weft. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n415/mode/2up p.377.] Fig.15a.</ref>]]

[[File:Structure of Jamdani fabric.PNG|thumb|Fig. 14. Structure of Jamdani fabric. 1. Warp, 2. Weft, 3. Supplementary weft. Courtesy: INSA.<ref>A. K. Bag, History of Technology in India (Vol. I), New Delhi: Indian National Science Academy, Lotika Varadarajan & Krishna Amin Patel, Textile Technology, [https://archive.org/details/in.ernet.dli.2015.205662/page/n415/mode/2up p.377.] Fig.15a.</ref>]]

The major differentiation between the North and South Indian schema in ornamentation is that in the former there is greater reliance on weft patterning whereas in the latter there has been a greater orientation to warp ornamentation. This is reflected in loom typology. The ability to experiment with weft structures is associated with the development of the reed which ensures a more even separation of ends and maintenance of tension. The reed number is related to the count of the yarn, and this in turn, conforms to the structure of the fabric. Its presence on the loom would also facilitate the working of loom attachments such as multiple shafts and harnesses.

The major differentiation between the North and South Indian schema in ornamentation is that in the former there is greater reliance on weft patterning whereas in the latter there has been a greater orientation to warp ornamentation. This is reflected in loom typology. The ability to experiment with weft structures is associated with the development of the reed which ensures a more even separation of ends and maintenance of tension. The reed number is related to the count of the yarn, and this in turn, conforms to the structure of the fabric. Its presence on the loom would also facilitate the working of loom attachments such as multiple shafts and harnesses.

 

The level at which major innovations to the loom begin to taper off is marked at the point when the harness attachment, associated with the drawloom, comes into existence. Functionally, the mechanism of the North, simplistically called the Banaras jala, and that of the South identified through the terms, jhungu and adai, are similar.

The level at which major innovations to the loom begin to taper off is marked at the point when the harness attachment, associated with the drawloom, comes into existence. Functionally, the mechanism of the North, simplistically called the Banaras jala, and that of the South identified through the terms, jhungu and adai, are similar.

 

However, there is a wide disparity if these are viewed from the points of view of origin and chronology. The Banaras Jala is derived from the Persian drawloom which achieved its specific identity under the Seljuks, A.D. 1038-1194 (Wulff, p.l76; Varadarajan, 1991, pp. 208, 217, 4.5). This would place the Banaras jala well within the medieval period. The lineage of the adai and jhungu (Fig.21) on the other hand, can be traced to the Malay Kota Bahru and the Chinese Han dynasty derived Kuala Trengganu loom of Thailand (28).  

However, there is a wide disparity if these are viewed from the points of view of origin and chronology. The Banaras Jala is derived from the Persian drawloom which achieved its specific identity under the Seljuks, A.D. 1038-1194 (Wulff, p.l76; Varadarajan, 1991, pp. 208, 217, 4.5). This would place the Banaras jala well within the medieval period. The lineage of the adai and jhungu (Fig.21) on the other hand, can be traced to the Malay Kota Bahru and the Chinese Han dynasty derived Kuala Trengganu loom of Thailand (28).