Module:Convert/data

-- Conversion data used by Module:Convert which uses mw.loadData() for -- read-only access to this module so that it is loaded only once per page. -- See en:Template:Convert/Transwiki guide if copying to another wiki. -- -- These data tables follow: -- all_units all properties for a unit, including default output -- default_exceptions exceptions for default output ('kg' and 'g' have different defaults) -- link_exceptions exceptions for links ('kg' and 'g' have different links) -- -- These tables are generated by a script which reads the wikitext of a page that -- documents the required properties of each unit; see en:Module:Convert/doc.

---

-- Do not change the data in this table because it is created by running -- -- a script that reads the wikitext from a wiki page (see note above). --

---

local all_units = {

   ["Gy"] = {

_name1 = "gray", _symbol = "Gy", utype = "absorbed radiation dose", scale = 1, prefixes = 1, default = "rad", link = "Gray (unit)",

   },
   ["rad"] = {

_name1 = "rad", _symbol = "rad", utype = "absorbed radiation dose", scale = 0.01, prefixes = 1, default = "Gy", link = "Rad (unit)",

   },
   ["cm/s2"] = {

name1 = "centimetre per second squared", name1_us = "centimeter per second squared", name2 = "centimetres per second squared", name2_us = "centimeters per second squared", symbol = "cm/s²", utype = "acceleration", scale = 0.01, default = "ft/s2", link = "Gal (unit)",

   },
   ["ft/s2"] = {

name1 = "foot per second squared", name2 = "feet per second squared", symbol = "ft/s²", utype = "acceleration", scale = 0.3048, default = "m/s2",

   },
   ["g0"] = {

name1 = "standard gravity", name2 = "standard gravities", symbol = "g₀", utype = "acceleration", scale = 9.80665, default = "m/s2",

   },
   ["km/hs"] = {

name1 = "kilometre per hour per second", name1_us = "kilometer per hour per second", name2 = "kilometres per hour per second", name2_us = "kilometers per hour per second", symbol = "km/(h⋅s)", utype = "acceleration", scale = 0.27777777777777779, default = "mph/s", link = "Acceleration",

   },
   ["km/s2"] = {

name1 = "kilometre per second squared", name1_us = "kilometer per second squared", name2 = "kilometres per second squared", name2_us = "kilometers per second squared", symbol = "km/s²", utype = "acceleration", scale = 1000, default = "mph/s", link = "Acceleration",

   },
   ["m/s2"] = {

name1 = "metre per second squared", name1_us = "meter per second squared", name2 = "metres per second squared", name2_us = "meters per second squared", symbol = "m/s²", utype = "acceleration", scale = 1, default = "ft/s2",

   },
   ["mph/s"] = {

name1 = "mile per hour per second", name2 = "miles per hour per second", symbol = "mph/s", utype = "acceleration", scale = 0.44704, default = "km/hs", link = "Acceleration",

   },
   ["km/h/s"] = {

target = "km/hs",

   },
   ["standard gravity"] = {

target = "g0",

   },
   ["1000sqft"] = {

name1 = "thousand square feet", name2 = "thousand square feet", symbol = "1000 sq ft", utype = "area", scale = 92.90304, default = "m2", link = "Square foot",

   },
   ["a"] = {

_name1 = "are", _symbol = "a", utype = "area", scale = 100, prefixes = 1, default = "sqft", link = "Hectare#Are",

   },
   ["acre"] = {

symbol = "acre", usename = 1, utype = "area", scale = 4046.8564224, default = "ha", subdivs = { ["rood"] = { 4, default = "ha" }, ["sqperch"] = { 160, default = "ha" } },

   },
   ["acre-sing"] = {

target = "acre",

   },
   ["arpent"] = {

symbol = "arpent", usename = 1, utype = "area", scale = 3418.89, default = "ha",

   },
   ["cda"] = {

name1 = "cuerda", symbol = "cda", utype = "area", scale = 3930.395625, default = "ha acre",

   },
   ["daa"] = {

name1 = "decare", symbol = "daa", utype = "area", scale = 1000, default = "km2 sqmi",

   },
   ["dunam"] = {

symbol = "dunam", usename = 1, utype = "area", scale = 1000, default = "km2 sqmi",

   },
   ["dunum"] = {

symbol = "dunum", usename = 1, utype = "area", scale = 1000, default = "km2 sqmi", link = "Dunam",

   },
   ["ha"] = {

name1 = "hectare", symbol = "ha", utype = "area", scale = 10000, default = "acre",

   },
   ["hectare"] = {

name1 = "hectare", symbol = "ha", usename = 1, utype = "area", scale = 10000, default = "acre",

   },
   ["Irish acre"] = {

name1 = "Irish acre", symbol = "Irish acres", utype = "area", scale = 6555.2385024, default = "ha", link = "Acre (Irish)",

   },
   ["m2"] = {

_name1 = "square metre", _name1_us= "square meter", _symbol = "m²", prefix_position= 8, utype = "area", scale = 1, prefixes = 2, default = "sqft", link = "Square metre",

   },
   ["pondemaat"] = {

name1 = "pondemaat", name2 = "pondemaat", symbol = "pond", utype = "area", scale = 3674.363358816, default = "m2", link = ":nl:pondemaat",

   },
   ["pyeong"] = {

name2 = "pyeong", symbol = "pyeong", usename = 1, utype = "area", scale = 3.3057851239669422, default = "m2",

   },
   ["rai"] = {

name2 = "rai", symbol = "rai", utype = "area", scale = 1600, default = "m2", link = "Rai (unit)",

   },
   ["rood"] = {

symbol = "rood", usename = 1, utype = "area", scale = 1011.7141056, default = "sqft m2", subdivs = { ["sqperch"] = { 40, default = "m2" } }, link = "Rood (unit)",

   },
   ["sqfoot"] = {

name1 = "square foot", name2 = "square foot", symbol = "sq ft", utype = "area", scale = 0.09290304, default = "m2",

   },
   ["sqft"] = {

name1 = "square foot", name2 = "square feet", symbol = "sq ft", utype = "area", scale = 0.09290304, default = "m2",

   },
   ["sqin"] = {

name1 = "square inch", name2 = "square inches", symbol = "sq in", utype = "area", scale = 0.00064516, default = "cm2",

   },
   ["sqmi"] = {

name1 = "square mile", symbol = "sq mi", utype = "area", scale = 2589988.110336, default = "km2",

   },
   ["sqnmi"] = {

name1 = "square nautical mile", symbol = "sq nmi", utype = "area", scale = 3429904, default = "km2 sqmi", link = "Nautical mile",

   },
   ["sqperch"] = {

name2 = "perches", symbol = "perch", usename = 1, utype = "area", scale = 25.29285264, default = "m2", link = "Perch (unit)#Area",

   },
   ["sqverst"] = {

symbol = "square verst", usename = 1, utype = "area", scale = 1138062.24, default = "km2 sqmi", link = "Verst",

   },
   ["sqyd"] = {

name1 = "square yard", symbol = "sq yd", utype = "area", scale = 0.83612736, default = "m2",

   },
   ["tsubo"] = {

name2 = "tsubo", symbol = "tsubo", usename = 1, utype = "area", scale = 3.3057851239669422, default = "m2", link = "Japanese units of measurement#Area",

   },
   ["acres"] = {

target = "acre",

   },
   ["are"] = {

target = "a",

   },
   ["decare"] = {

target = "daa",

   },
   ["foot2"] = {

target = "sqfoot",

   },
   ["ft2"] = {

target = "sqft",

   },
   ["in2"] = {

target = "sqin", symbol = "in²",

   },
   ["km²"] = {

target = "km2",

   },
   ["mi2"] = {

target = "sqmi",

   },
   ["million acre"] = {

target = "e6acre",

   },
   ["million acres"] = {

target = "e6acre",

   },
   ["million hectares"] = {

target = "e6ha",

   },
   ["m²"] = {

target = "m2",

   },
   ["nmi2"] = {

target = "sqnmi",

   },
   ["pond"] = {

target = "pondemaat",

   },
   ["sq arp"] = {

target = "arpent",

   },
   ["sqkm"] = {

target = "km2",

   },
   ["sqm"] = {

target = "m2",

   },
   ["square verst"] = {

target = "sqverst",

   },
   ["verst2"] = {

target = "sqverst",

   },
   ["yd2"] = {

target = "sqyd",

   },
   ["m2/ha"] = {

name1 = "square metre per hectare", name1_us = "square meter per hectare", name2 = "square metres per hectare", name2_us = "square meters per hectare", symbol = "m²/ha", utype = "area per unit area", scale = 0.0001, default = "sqft/acre", link = "Basal area",

   },
   ["sqft/acre"] = {

name1 = "square foot per acre", name2 = "square feet per acre", symbol = "sq ft/acre", utype = "area per unit area", scale = 2.295684113865932e-5, default = "m2/ha", link = "Basal area",

   },
   ["cent"] = {

name1 = "cent", symbol = "¢", utype = "cent", scale = 1, default = "cent", link = "Cent (currency)",

   },
   ["¢"] = {

target = "cent",

   },
   ["A.h"] = {

name1 = "ampere hour", symbol = "A⋅h", utype = "charge", scale = 3600, default = "coulomb",

   },
   ["coulomb"] = {

_name1 = "coulomb", _symbol = "C", utype = "charge", scale = 1, prefixes = 1, default = "e", link = "Coulomb",

   },
   ["e"] = {

name1 = "elementary charge", symbol = "e", utype = "charge", scale = 1.602176487e-19, default = "coulomb",

   },
   ["g-mol"] = {

name1 = "gram-mole", symbol = "g‑mol", utype = "chemical amount", scale = 1, default = "lbmol", link = "Mole (unit)",

   },
   ["gmol"] = {

name1 = "gram-mole", symbol = "gmol", utype = "chemical amount", scale = 1, default = "lbmol", link = "Mole (unit)",

   },
   ["kmol"] = {

name1 = "kilomole", symbol = "kmol", utype = "chemical amount", scale = 1000, default = "lbmol", link = "Mole (unit)",

   },
   ["lb-mol"] = {

name1 = "pound-mole", symbol = "lb‑mol", utype = "chemical amount", scale = 453.59237, default = "mol", link = "Mole (unit)#Other units called \"mole\"",

   },
   ["lbmol"] = {

name1 = "pound-mole", symbol = "lbmol", utype = "chemical amount", scale = 453.59237, default = "mol", link = "Mole (unit)#Other units called \"mole\"",

   },
   ["mol"] = {

name1 = "mole", symbol = "mol", utype = "chemical amount", scale = 1, default = "lbmol", link = "Mole (unit)",

   },
   ["kgCO2/L"] = {

name1 = "kilogram per litre", name1_us = "kilogram per liter", name2 = "kilograms per litre", name2_us = "kilograms per liter", symbol = "kg(CO₂)/L", utype = "co2 per unit volume", scale = 1000, default = "lbCO2/USgal", link = "Exhaust gas",

   },
   ["lbCO2/USgal"] = {

name1 = "pound per US gallon", name2 = "pounds per US gallon", symbol = "lbCO2/US gal", utype = "co2 per unit volume", scale = 119.82642731689663, default = "kgCO2/L", link = "Exhaust gas",

   },
   ["oz/lb"] = {

per = { "oz", "lb" }, utype = "concentration", default = "mg/kg",

   },
   ["mg/kg"] = {

per = { "mg", "kg" }, utype = "concentration", default = "oz/lb",

   },
   ["g/dm3"] = {

name1 = "gram per cubic decimetre", name1_us = "gram per cubic decimeter", name2 = "grams per cubic decimetre", name2_us = "grams per cubic decimeter", symbol = "g/dm³", utype = "density", scale = 1, default = "kg/m3", link = "Density",

   },
   ["g/L"] = {

name1 = "gram per litre", name1_us = "gram per liter", name2 = "grams per litre", name2_us = "grams per liter", symbol = "g/L", utype = "density", scale = 1, default = "lb/cuin", link = "Density",

   },
   ["g/mL"] = {

name1 = "gram per millilitre", name1_us = "gram per milliliter", name2 = "grams per millilitre", name2_us = "grams per milliliter", symbol = "g/mL", utype = "density", scale = 1000, default = "lb/cuin", link = "Density",

   },
   ["g/ml"] = {

name1 = "gram per millilitre", name1_us = "gram per milliliter", name2 = "grams per millilitre", name2_us = "grams per milliliter", symbol = "g/ml", utype = "density", scale = 1000, default = "lb/cuin", link = "Density",

   },
   ["kg/dm3"] = {

name1 = "kilogram per cubic decimetre", name1_us = "kilogram per cubic decimeter", name2 = "kilograms per cubic decimetre", name2_us = "kilograms per cubic decimeter", symbol = "kg/dm³", utype = "density", scale = 1000, default = "lb/cuft", link = "Density",

   },
   ["kg/L"] = {

name1 = "kilogram per litre", name1_us = "kilogram per liter", name2 = "kilograms per litre", name2_us = "kilograms per liter", symbol = "kg/L", utype = "density", scale = 1000, default = "lb/USgal", link = "Density",

   },
   ["kg/l"] = {

name1 = "kilogram per litre", name1_us = "kilogram per liter", name2 = "kilograms per litre", name2_us = "kilograms per liter", symbol = "kg/l", utype = "density", scale = 1000, default = "lb/USgal", link = "Density",

   },
   ["kg/m3"] = {

name1 = "kilogram per cubic metre", name1_us = "kilogram per cubic meter", name2 = "kilograms per cubic metre", name2_us = "kilograms per cubic meter", symbol = "kg/m³", utype = "density", scale = 1, default = "lb/cuyd", link = "Density",

   },
   ["lb/cuft"] = {

name1 = "pound per cubic foot", name2 = "pounds per cubic foot", symbol = "lb/cu ft", utype = "density", scale = 16.018463373960142, default = "g/cm3", link = "Density",

   },
   ["lb/cuin"] = {

name1 = "pound per cubic inch", name2 = "pounds per cubic inch", symbol = "lb/cu in", utype = "density", scale = 27679.904710203122, default = "g/cm3", link = "Density",

   },
   ["lb/cuyd"] = {

name1 = "pound per cubic yard", name2 = "pounds per cubic yard", symbol = "lb/cu yd", utype = "density", scale = 0.5932764212577829, default = "kg/m3", link = "Density",

   },
   ["lb/impgal"] = {

name1 = "pound per imperial gallon", name2 = "pounds per imperial gallon", symbol = "lb/imp gal", utype = "density", scale = 99.776372663101697, default = "kg/L", link = "Density",

   },
   ["lb/in3"] = {

name1 = "pound per cubic inch", name2 = "pounds per cubic inch", symbol = "lb/cu in", utype = "density", scale = 27679.904710203122, default = "g/cm3", link = "Density",

   },
   ["lb/U.S.gal"] = {

name1 = "pound per U.S. gallon", name2 = "pounds per U.S. gallon", symbol = "lb/U.S. gal", utype = "density", scale = 119.82642731689663, default = "kg/L", link = "Density",

   },
   ["lb/USbu"] = {

name1 = "pound per US bushel", name2 = "pounds per US bushel", symbol = "lb/US bu", utype = "density", scale = 12.871859780974471, default = "kg/m3", link = "Bushel",

   },
   ["lb/USgal"] = {

name1 = "pound per US gallon", name2 = "pounds per US gallon", symbol = "lb/US gal", utype = "density", scale = 119.82642731689663, default = "kg/L", link = "Density",

   },
   ["lbm/cuin"] = {

name1 = "pound mass per cubic inch", name2 = "pounds mass per cubic inch", symbol = "lbm/cu in", utype = "density", scale = 27679.904710203122, default = "g/cm3", link = "Density",

   },
   ["mg/L"] = {

name1 = "milligram per litre", name1_us = "milligram per liter", name2 = "milligrams per litre", name2_us = "milligrams per liter", symbol = "mg/L", utype = "density", scale = 0.001, default = "lb/cuin", link = "Density",

   },
   ["oz/cuin"] = {

name1 = "ounce per cubic inch", name2 = "ounces per cubic inch", symbol = "oz/cu in", utype = "density", scale = 1729.9940443876951, default = "g/cm3", link = "Density",

   },
   ["g/cm3"] = {

per = { "g", "cm3" }, utype = "density", default = "lb/cuin",

   },
   ["g/m3"] = {

per = { "g", "m3" }, utype = "density", default = "lb/cuyd", link = "Density",

   },
   ["Mg/m3"] = {

per = { "Mg", "m3" }, utype = "density", default = "lb/cuft",

   },
   ["mg/l"] = {

per = { "mg", "l" }, utype = "density", default = "oz/cuin",

   },
   ["μg/dL"] = {

per = { "μg", "dL" }, utype = "density", default = "lb/cuin",

   },
   ["μg/l"] = {

per = { "μg", "l" }, utype = "density", default = "oz/cuin",

   },
   ["lb/ft3"] = {

target = "lb/cuft",

   },
   ["lb/yd3"] = {

target = "lb/cuyd",

   },
   ["lbm/in3"] = {

target = "lbm/cuin",

   },
   ["mcg/dL"] = {

target = "μg/dL",

   },
   ["oz/in3"] = {

target = "oz/cuin",

   },
   ["ug/dL"] = {

target = "μg/dL",

   },
   ["ug/l"] = {

target = "μg/l",

   },
   ["B.O.T.U."] = {

name1 = "Board of Trade Unit", symbol = "B.O.T.U.", utype = "energy", scale = 3600000, default = "MJ", link = "Watt-hour",

   },
   ["bboe"] = {

name1 = "barrel of oil equivalent", name2 = "barrels of oil equivalent", symbol = "bboe", utype = "energy", scale = 6117863200, default = "GJ",

   },
   ["BOE"] = {

name1 = "barrel of oil equivalent", name2 = "barrels of oil equivalent", symbol = "BOE", utype = "energy", scale = 6117863200, default = "GJ",

   },
   ["BTU"] = {

name1 = "British thermal unit", symbol = "BTU", utype = "energy", scale = 1055.05585262, default = "kJ",

   },
   ["Btu"] = {

name1 = "British thermal unit", symbol = "Btu", utype = "energy", scale = 1055.05585262, default = "kJ",

   },
   ["BTU-39F"] = {

name1 = "British thermal unit (39°F)", name2 = "British thermal units (39°F)", symbol = "BTU_39°F", utype = "energy", scale = 1059.67, default = "kJ", link = "British thermal unit",

   },
   ["Btu-39F"] = {

name1 = "British thermal unit (39°F)", name2 = "British thermal units (39°F)", symbol = "Btu_39°F", utype = "energy", scale = 1059.67, default = "kJ", link = "British thermal unit",

   },
   ["BTU-59F"] = {

name1 = "British thermal unit (59°F)", name2 = "British thermal units (59°F)", symbol = "BTU_59°F", utype = "energy", scale = 1054.804, default = "kJ", link = "British thermal unit",

   },
   ["Btu-59F"] = {

name1 = "British thermal unit (59°F)", name2 = "British thermal units (59°F)", symbol = "Btu_59°F", utype = "energy", scale = 1054.804, default = "kJ", link = "British thermal unit",

   },
   ["BTU-60F"] = {

name1 = "British thermal unit (60°F)", name2 = "British thermal units (60°F)", symbol = "BTU_60°F", utype = "energy", scale = 1054.68, default = "kJ", link = "British thermal unit",

   },
   ["Btu-60F"] = {

name1 = "British thermal unit (60°F)", name2 = "British thermal units (60°F)", symbol = "Btu_60°F", utype = "energy", scale = 1054.68, default = "kJ", link = "British thermal unit",

   },
   ["BTU-63F"] = {

name1 = "British thermal unit (63°F)", name2 = "British thermal units (63°F)", symbol = "BTU_63°F", utype = "energy", scale = 1054.6, default = "kJ", link = "British thermal unit",

   },
   ["Btu-63F"] = {

name1 = "British thermal unit (63°F)", name2 = "British thermal units (63°F)", symbol = "Btu_63°F", utype = "energy", scale = 1054.6, default = "kJ", link = "British thermal unit",

   },
   ["BTU-ISO"] = {

name1 = "British thermal unit (ISO)", name2 = "British thermal units (ISO)", symbol = "BTU_ISO", utype = "energy", scale = 1055.056, default = "kJ", link = "British thermal unit",

   },
   ["Btu-ISO"] = {

target = "BTU-ISO",

   },
   ["BTU-IT"] = {

name1 = "British thermal unit (IT)", name2 = "British thermal units (IT)", symbol = "BTU_IT", utype = "energy", scale = 1055.05585262, default = "kJ", link = "British thermal unit",

   },
   ["Btu-IT"] = {

name1 = "British thermal unit (IT)", name2 = "British thermal units (IT)", symbol = "Btu_IT", utype = "energy", scale = 1055.05585262, default = "kJ", link = "British thermal unit",

   },
   ["BTU-mean"] = {

name1 = "British thermal unit (mean)", name2 = "British thermal units (mean)", symbol = "BTU_mean", utype = "energy", scale = 1055.87, default = "kJ", link = "British thermal unit",

   },
   ["Btu-mean"] = {

name1 = "British thermal unit (mean)", name2 = "British thermal units (mean)", symbol = "Btu_mean", utype = "energy", scale = 1055.87, default = "kJ", link = "British thermal unit",

   },
   ["BTU-th"] = {

name1 = "British thermal unit (thermochemical)", name2 = "British thermal units (thermochemical)", symbol = "BTU_th", utype = "energy", scale = 1054.35026444, default = "kJ", link = "British thermal unit",

   },
   ["Btu-th"] = {

name1 = "British thermal unit (thermochemical)", name2 = "British thermal units (thermochemical)", symbol = "Btu_th", utype = "energy", scale = 1054.35026444, default = "kJ", link = "British thermal unit",

   },
   ["Cal"] = {

name1 = "calorie", symbol = "Cal", utype = "energy", scale = 4184, default = "kJ",

   },
   ["cal"] = {

name1 = "calorie", symbol = "cal", utype = "energy", scale = 4.184, default = "J",

   },
   ["Cal-15"] = {

name1 = "Calorie (15°C)", name2 = "Calories (15°C)", symbol = "Cal₁₅", utype = "energy", scale = 4185.8, default = "kJ", link = "Calorie",

   },
   ["cal-15"] = {

name1 = "calorie (15°C)", name2 = "calories (15°C)", symbol = "cal₁₅", utype = "energy", scale = 4.1858, default = "J", link = "Calorie",

   },
   ["Cal-IT"] = {

name1 = "Calorie (International Steam Table)", name2 = "Calories (International Steam Table)", symbol = "Cal_IT", utype = "energy", scale = 4186.8, default = "kJ", link = "Calorie",

   },
   ["cal-IT"] = {

name1 = "calorie (International Steam Table)", name2 = "calories (International Steam Table)", symbol = "cal_IT", utype = "energy", scale = 4.1868, default = "J", link = "Calorie",

   },
   ["Cal-th"] = {

name1 = "Calorie (thermochemical)", name2 = "Calories (thermochemical)", symbol = "Cal_th", utype = "energy", scale = 4184, default = "kJ", link = "Calorie",

   },
   ["cal-th"] = {

name1 = "calorie (thermochemical)", name2 = "calories (thermochemical)", symbol = "cal_th", utype = "energy", scale = 4.184, default = "J", link = "Calorie",

   },
   ["ccatm"] = {

name1 = "cubic centimetre-atmosphere", name1_us = "cubic centimeter-atmosphere", symbol = "cc⋅atm", utype = "energy", scale = 0.101325, default = "mJ", link = "Atmosphere (unit)",

   },
   ["CHU-IT"] = {

name1 = "Celsius heat unit (International Table)", name2 = "Celsius heat units (International Table)", symbol = "CHU_IT", utype = "energy", scale = 1899.100534716, default = "kJ", link = "Conversion of units#Energy",

   },
   ["cm3atm"] = {

name1 = "cubic centimetre-atmosphere", name1_us = "cubic centimeter-atmosphere", symbol = "cm³⋅atm", utype = "energy", scale = 0.101325, default = "mJ", link = "Atmosphere (unit)",

   },
   ["cufootatm"] = {

name1 = "cubic foot of atmosphere", name2 = "cubic foot of atmosphere", symbol = "cu ft atm", utype = "energy", scale = 2869.2044809344, default = "kJ", link = "Atmosphere (unit)",

   },
   ["cufootnaturalgas"] = {

name1 = "cubic foot of natural gas", name2 = "cubic foot of natural gas", symbol = "cuftnaturalgas", usename = 1, utype = "energy", scale = 1055055.85262, default = "MJ", link = "Conversion of units#Energy",

   },
   ["cuftatm"] = {

name1 = "cubic foot of atmosphere", name2 = "cubic feet of atmosphere", symbol = "cu ft atm", utype = "energy", scale = 2869.2044809344, default = "kJ", link = "Atmosphere (unit)",

   },
   ["cuftnaturalgas"] = {

name1 = "cubic foot of natural gas", name2 = "cubic feet of natural gas", symbol = "cuftnaturalgas", usename = 1, utype = "energy", scale = 1055055.85262, default = "MJ", link = "Conversion of units#Energy",

   },
   ["cuydatm"] = {

name1 = "cubic yard of atmosphere", name2 = "cubic yards of atmosphere", symbol = "cu yd atm", utype = "energy", scale = 77468.5209852288, default = "kJ", link = "Atmosphere (unit)",

   },
   ["Eh"] = {

name1 = "Hartree", symbol = "E_h", utype = "energy", scale = 4.35974417e-18, default = "eV",

   },
   ["erg"] = {

symbol = "erg", utype = "energy", scale = 0.0000001, default = "μJ",

   },
   ["eV"] = {

name1 = "electronvolt", symbol = "eV", utype = "energy", scale = 1.602176487e-19, default = "aJ",

   },
   ["feV"] = {

name1 = "femtoelectronvolt", symbol = "feV", utype = "energy", scale = 1.602176487e-34, default = "yJ", link = "Electronvolt",

   },
   ["foe"] = {

symbol = "foe", utype = "energy", scale = 1e44, default = "YJ", link = "Foe (unit)",

   },
   ["ftlb"] = {

name1 = "foot-pound", symbol = "ft⋅lb", utype = "energy", alttype = "torque", scale = 1.3558179483314004, default = "J", link = "Foot-pound (energy)",

   },
   ["ftlb-f"] = {

name1 = "foot-pound force", name2 = "foot-pounds force", symbol = "ft⋅lb_f", utype = "energy", alttype = "torque", scale = 1.3558179483314004, default = "J", link = "Foot-pound (energy)",

   },
   ["ftlbf"] = {

name1 = "foot-pound force", name2 = "foot-pounds force", symbol = "ft⋅lbf", utype = "energy", alttype = "torque", scale = 1.3558179483314004, default = "J", link = "Foot-pound (energy)",

   },
   ["ftpdl"] = {

name1 = "foot-poundal", symbol = "ft⋅pdl", utype = "energy", scale = 0.0421401100938048, default = "J",

   },
   ["GeV"] = {

name1 = "gigaelectronvolt", symbol = "GeV", utype = "energy", scale = 1.602176487e-10, default = "nJ", link = "Electronvolt",

   },
   ["GLatm"] = {

name1 = "gigalitre-atmosphere", name1_us = "gigaliter-atmosphere", symbol = "GL⋅atm", utype = "energy", scale = 101325000000, default = "GJ", link = "Atmosphere (unit)",

   },
   ["Glatm"] = {

name1 = "gigalitre-atmosphere", name1_us = "gigaliter-atmosphere", symbol = "Gl⋅atm", utype = "energy", scale = 101325000000, default = "GJ", link = "Atmosphere (unit)",

   },
   ["gTNT"] = {

name2 = "grams of TNT", symbol = "gram of TNT", usename = 1, utype = "energy", scale = 4184, default = "kJ", link = "TNT equivalent",

   },
   ["Gtoe"] = {

name1 = "gigatonne of oil equivalent", name2 = "gigatonnes of oil equivalent", symbol = "Gtoe", utype = "energy", scale = 4.1868e19, default = "EJ", link = "Tonne of oil equivalent",

   },
   ["GtonTNT"] = {

name2 = "gigatons of TNT", symbol = "gigaton of TNT", usename = 1, utype = "energy", scale = 4.184e18, default = "EJ", link = "TNT equivalent",

   },
   ["GtTNT"] = {

name2 = "gigatonnes of TNT", symbol = "gigatonne of TNT", usename = 1, utype = "energy", scale = 4.184e18, default = "EJ", link = "TNT equivalent",

   },
   ["GW.h"] = {

name1 = "gigawatt-hour", symbol = "GW⋅h", utype = "energy", scale = 3.6e12, default = "TJ", link = "Watt-hour",

   },
   ["GWh"] = {

name1 = "gigawatt-hour", symbol = "GWh", utype = "energy", scale = 3.6e12, default = "TJ", link = "Watt-hour",

   },
   ["hph"] = {

name1 = "horsepower-hour", symbol = "hp⋅h", utype = "energy", scale = 2684519.537696172792, default = "kWh", link = "Horsepower",

   },
   ["impgalatm"] = {

name1 = "imperial gallon-atmosphere", symbol = "imp gal⋅atm", utype = "energy", scale = 460.63256925, default = "J", link = "Atmosphere (unit)",

   },
   ["inlb"] = {

name1 = "inch-pound", symbol = "in⋅lb", utype = "energy", alttype = "torque", scale = 0.1129848290276167, default = "mJ", link = "Foot-pound (energy)",

   },
   ["inlb-f"] = {

name1 = "inch-pound force", name2 = "inch-pounds force", symbol = "in⋅lb_f", utype = "energy", alttype = "torque", scale = 0.1129848290276167, default = "mJ", link = "Foot-pound (energy)",

   },
   ["inlbf"] = {

name1 = "inch-pound force", name2 = "inch-pounds force", symbol = "in⋅lbf", utype = "energy", alttype = "torque", scale = 0.1129848290276167, default = "mJ", link = "Foot-pound (energy)",

   },
   ["inoz-f"] = {

name1 = "inch-ounce force", name2 = "inch-ounces force", symbol = "in⋅oz_f", utype = "energy", alttype = "torque", scale = 0.00706155181422604375, default = "mJ", link = "Foot-pound (energy)",

   },
   ["inozf"] = {

name1 = "inch-ounce force", name2 = "inch-ounces force", symbol = "in⋅ozf", utype = "energy", alttype = "torque", scale = 0.00706155181422604375, default = "mJ", link = "Foot-pound (energy)",

   },
   ["J"] = {

_name1 = "joule", _symbol = "J", utype = "energy", scale = 1, prefixes = 1, default = "cal", link = "Joule",

   },
   ["kBOE"] = {

name1 = "kilo barrel of oil equivalent", name2 = "kilo barrels of oil equivalent", symbol = "kBOE", utype = "energy", scale = 6.1178632e12, default = "TJ", link = "Barrel of oil equivalent",

   },
   ["kcal"] = {

name1 = "kilocalorie", symbol = "kcal", utype = "energy", scale = 4184, default = "kJ", link = "Calorie",

   },
   ["kcal-15"] = {

name1 = "kilocalorie (15°C)", name2 = "kilocalories (15°C)", symbol = "kcal₁₅", utype = "energy", scale = 4185.8, default = "kJ", link = "Calorie",

   },
   ["kcal-IT"] = {

name1 = "kilocalorie (International Steam Table)", name2 = "kilocalories (International Steam Table)", symbol = "kcal_IT", utype = "energy", scale = 4186.8, default = "kJ", link = "Calorie",

   },
   ["kcal-th"] = {

name1 = "kilocalorie (thermochemical)", name2 = "kilocalories (thermochemical)", symbol = "kcal_th", utype = "energy", scale = 4184, default = "kJ", link = "Calorie",

   },
   ["kerg"] = {

name1 = "kiloerg", symbol = "kerg", utype = "energy", scale = 0.0001, default = "mJ", link = "Erg",

   },
   ["keV"] = {

name1 = "kiloelectronvolt", symbol = "keV", utype = "energy", scale = 1.602176487e-16, default = "fJ", link = "Electronvolt",

   },
   ["kgTNT"] = {

name2 = "kilograms of TNT", symbol = "kilogram of TNT", usename = 1, utype = "energy", scale = 4184000, default = "MJ", link = "TNT equivalent",

   },
   ["kLatm"] = {

name1 = "kilolitre-atmosphere", name1_us = "kiloliter-atmosphere", symbol = "kL⋅atm", utype = "energy", scale = 101325, default = "kJ", link = "Atmosphere (unit)",

   },
   ["klatm"] = {

name1 = "kilolitre-atmosphere", name1_us = "kiloliter-atmosphere", symbol = "kl⋅atm", utype = "energy", scale = 101325, default = "kJ", link = "Atmosphere (unit)",

   },
   ["kt(TNT)"] = {

name1 = "kilotonne", name1_us = "kiloton", symbol = "kt", utype = "energy", scale = 4.184e12, default = "TJ", link = "TNT equivalent",

   },
   ["ktoe"] = {

name1 = "kilotonne of oil equivalent", name2 = "kilotonnes of oil equivalent", symbol = "ktoe", utype = "energy", scale = 4.1868e13, default = "TJ", link = "Tonne of oil equivalent",

   },
   ["ktonTNT"] = {

name1 = "kiloton of TNT", name2 = "kilotons of TNT", symbol = "kt", utype = "energy", scale = 4.184e12, default = "TJ", link = "TNT equivalent",

   },
   ["ktTNT"] = {

name2 = "kilotonnes of TNT", symbol = "kilotonne of TNT", usename = 1, utype = "energy", scale = 4.184e12, default = "TJ", link = "TNT equivalent",

   },
   ["kW.h"] = {

name1 = "kilowatt-hour", symbol = "kW⋅h", utype = "energy", scale = 3600000, default = "MJ", link = "Watt-hour",

   },
   ["kWh"] = {

name1 = "kilowatt-hour", symbol = "kWh", utype = "energy", scale = 3600000, default = "MJ", link = "Watt-hour",

   },
   ["Latm"] = {

name1 = "litre-atmosphere", name1_us = "liter-atmosphere", symbol = "L⋅atm", utype = "energy", scale = 101.325, default = "J", link = "Atmosphere (unit)",

   },
   ["latm"] = {

name1 = "litre-atmosphere", name1_us = "liter-atmosphere", symbol = "l⋅atm", utype = "energy", scale = 101.325, default = "J", link = "Atmosphere (unit)",

   },
   ["m3atm"] = {

name1 = "cubic metre-atmosphere", name1_us = "cubic meter-atmosphere", symbol = "m³⋅atm", utype = "energy", scale = 101325, default = "kJ", link = "Atmosphere (unit)",

   },
   ["Mcal"] = {

name1 = "megacalorie", symbol = "Mcal", utype = "energy", scale = 4184000, default = "MJ", link = "Calorie",

   },
   ["mcal"] = {

name1 = "millicalorie", symbol = "mcal", utype = "energy", scale = 0.004184, default = "mJ", link = "Calorie",

   },
   ["Mcal-15"] = {

name1 = "megacalorie (15°C)", name2 = "megacalories (15°C)", symbol = "Mcal₁₅", utype = "energy", scale = 4185800, default = "MJ", link = "Calorie",

   },
   ["mcal-15"] = {

name1 = "millicalorie (15°C)", name2 = "millicalories (15°C)", symbol = "mcal₁₅", utype = "energy", scale = 0.0041858, default = "mJ", link = "Calorie",

   },
   ["Mcal-IT"] = {

name1 = "megacalorie (International Steam Table)", name2 = "megacalories (International Steam Table)", symbol = "Mcal_IT", utype = "energy", scale = 4186800, default = "MJ", link = "Calorie",

   },
   ["mcal-IT"] = {

name1 = "millicalorie (International Steam Table)", name2 = "millicalories (International Steam Table)", symbol = "mcal_IT", utype = "energy", scale = 0.0041868, default = "mJ", link = "Calorie",

   },
   ["Mcal-th"] = {

name1 = "megacalorie (thermochemical)", name2 = "megacalories (thermochemical)", symbol = "Mcal_th", utype = "energy", scale = 4184000, default = "MJ", link = "Calorie",

   },
   ["mcal-th"] = {

name1 = "millicalorie (thermochemical)", name2 = "millicalories (thermochemical)", symbol = "mcal_th", utype = "energy", scale = 0.004184, default = "mJ", link = "Calorie",

   },
   ["Merg"] = {

name1 = "megaerg", symbol = "Merg", utype = "energy", scale = 0.1, default = "J", link = "Erg",

   },
   ["merg"] = {

name1 = "millierg", symbol = "merg", utype = "energy", scale = 0.0000000001, default = "μJ", link = "Erg",

   },
   ["MeV"] = {

name1 = "megaelectronvolt", symbol = "MeV", utype = "energy", scale = 1.602176487e-13, default = "pJ", link = "Electronvolt",

   },
   ["meV"] = {

name1 = "millielectronvolt", symbol = "meV", utype = "energy", scale = 1.602176487e-22, default = "zJ", link = "Electronvolt",

   },
   ["MLatm"] = {

name1 = "megalitre-atmosphere", name1_us = "megaliter-atmosphere", symbol = "ML⋅atm", utype = "energy", scale = 101325000, default = "MJ", link = "Atmosphere (unit)",

   },
   ["Mlatm"] = {

name1 = "megalitre-atmosphere", name1_us = "megaliter-atmosphere", symbol = "Ml⋅atm", utype = "energy", scale = 101325000, default = "MJ", link = "Atmosphere (unit)",

   },
   ["mLatm"] = {

name1 = "millilitre-atmosphere", name1_us = "milliliter-atmosphere", symbol = "L⋅atm", utype = "energy", scale = 0.101325, default = "mJ", link = "Atmosphere (unit)",

   },
   ["mlatm"] = {

name1 = "millilitre-atmosphere", name1_us = "milliliter-atmosphere", symbol = "l⋅atm", utype = "energy", scale = 0.101325, default = "mJ", link = "Atmosphere (unit)",

   },
   ["MMBtu"] = {

name1 = "million British thermal units", name2 = "million British thermal units", symbol = "MMBtu", utype = "energy", scale = 1055055852.62, default = "GJ", link = "British thermal unit",

   },
   ["Mt(TNT)"] = {

name1 = "megatonne", name1_us = "megaton", symbol = "Mt", utype = "energy", scale = 4.184e15, default = "PJ", link = "TNT equivalent",

   },
   ["Mtoe"] = {

name1 = "megatonne of oil equivalent", name2 = "megatonnes of oil equivalent", symbol = "Mtoe", utype = "energy", scale = 4.1868e16, default = "PJ", link = "Tonne of oil equivalent",

   },
   ["MtonTNT"] = {

name1 = "megaton of TNT", name2 = "megatons of TNT", symbol = "Mt", utype = "energy", scale = 4.184e15, default = "PJ", link = "TNT equivalent",

   },
   ["mtonTNT"] = {

name2 = "millitons of TNT", symbol = "milliton of TNT", usename = 1, utype = "energy", scale = 4184000, default = "MJ", link = "TNT equivalent",

   },
   ["MtTNT"] = {

name2 = "megatonnes of TNT", symbol = "megatonne of TNT", usename = 1, utype = "energy", scale = 4.184e15, default = "PJ", link = "TNT equivalent",

   },
   ["mtTNT"] = {

name2 = "millitonnes of TNT", symbol = "millitonne of TNT", usename = 1, utype = "energy", scale = 4184000, default = "MJ", link = "TNT equivalent",

   },
   ["MW.h"] = {

name1 = "megawatt-hour", symbol = "MW⋅h", utype = "energy", scale = 3600000000, default = "GJ", link = "Watt-hour",

   },
   ["mW.h"] = {

name1 = "milliwatt-hour", symbol = "mW⋅h", utype = "energy", scale = 3.6, default = "J", link = "Watt-hour",

   },
   ["MWh"] = {

name1 = "megawatt-hour", symbol = "MWh", utype = "energy", scale = 3600000000, default = "GJ", link = "Watt-hour",

   },
   ["mWh"] = {

name1 = "milliwatt-hour", symbol = "mWh", utype = "energy", scale = 3.6, default = "J", link = "Watt-hour",

   },
   ["neV"] = {

name1 = "nanoelectronvolt", symbol = "neV", utype = "energy", scale = 1.602176487e-28, default = "yJ", link = "Electronvolt",

   },
   ["PeV"] = {

name1 = "petaelectronvolt", symbol = "PeV", utype = "energy", scale = 0.0001602176487, default = "mJ", link = "Electronvolt",

   },
   ["peV"] = {

name1 = "picoelectronvolt", symbol = "peV", utype = "energy", scale = 1.602176487e-31, default = "yJ", link = "Electronvolt",

   },
   ["PSh"] = {

name1 = "Pferdestärkenstunde", symbol = "PSh", utype = "energy", scale = 2647795.5, default = "kWh",

   },
   ["quad"] = {

name1 = "quadrillion British thermal units", name2 = "quadrillion British thermal units", symbol = "quad", utype = "energy", scale = 1.054804e18, default = "EJ", link = "Quad (unit)",

   },
   ["Ry"] = {

name1 = "rydberg", symbol = "Ry", utype = "energy", scale = 2.1798741e-18, default = "eV", link = "Rydberg constant",

   },
   ["scc"] = {

name1 = "standard cubic centimetre", name1_us = "standard cubic centimeter", symbol = "scc", utype = "energy", scale = 0.101325, default = "mJ", link = "Atmosphere (unit)",

   },
   ["scf"] = {

name1 = "standard cubic foot", name2 = "standard cubic feet", symbol = "scf", utype = "energy", scale = 2869.2044809344, default = "kJ", link = "Atmosphere (unit)",

   },
   ["scfoot"] = {

name1 = "standard cubic foot", name2 = "standard cubic foot", symbol = "scf", utype = "energy", scale = 2869.2044809344, default = "kJ", link = "Atmosphere (unit)",

   },
   ["scy"] = {

name1 = "standard cubic yard", symbol = "scy", utype = "energy", scale = 77468.5209852288, default = "kJ", link = "Atmosphere (unit)",

   },
   ["sl"] = {

name1 = "standard litre", name1_us = "standard liter", symbol = "sl", utype = "energy", scale = 101.325, default = "J", link = "Atmosphere (unit)",

   },
   ["t(TNT)"] = {

name1 = "tonne", name1_us = "ton", symbol = "t", utype = "energy", scale = 4184000000, default = "GJ", link = "TNT equivalent",

   },
   ["TeV"] = {

name1 = "teraelectronvolt", symbol = "TeV", utype = "energy", scale = 1.602176487e-7, default = "μJ", link = "Electronvolt",

   },
   ["th"] = {

name1 = "thermie", symbol = "th", utype = "energy", scale = 4186800, default = "MJ", link = "Conversion of units#Energy",

   },
   ["thm-EC"] = {

name1 = "therm (EC)", name2 = "therms (EC)", symbol = "thm (EC)", utype = "energy", scale = 105506000, default = "MJ", link = "Therm",

   },
   ["thm-UK"] = {

name1 = "therm (UK)", name2 = "therms (UK)", symbol = "thm (UK)", utype = "energy", scale = 105505585.257348, default = "MJ", link = "Therm",

   },
   ["thm-US"] = {

name1 = "therm (US)", name1_us = "therm (U.S.)", name2 = "therms (US)", name2_us = "therms (U.S.)", symbol = "thm (US)", sym_us = "thm (U.S.)", utype = "energy", scale = 105480400, default = "MJ", link = "Therm",

   },
   ["toe"] = {

name1 = "tonne of oil equivalent", name2 = "tonnes of oil equivalent", symbol = "toe", utype = "energy", scale = 41868000000, default = "GJ",

   },
   ["tonTNT"] = {

name2 = "tons of TNT", symbol = "ton of TNT", usename = 1, utype = "energy", scale = 4184000000, default = "GJ", link = "TNT equivalent",

   },
   ["tTNT"] = {

name2 = "tonnes of TNT", symbol = "tonne of TNT", usename = 1, utype = "energy", scale = 4184000000, default = "GJ", link = "TNT equivalent",

   },
   ["TtonTNT"] = {

name2 = "teratons of TNT", symbol = "teraton of TNT", usename = 1, utype = "energy", scale = 4.184e21, default = "ZJ", link = "TNT equivalent",

   },
   ["TtTNT"] = {

name2 = "teratonnes of TNT", symbol = "teratonne of TNT", usename = 1, utype = "energy", scale = 4.184e21, default = "ZJ", link = "TNT equivalent",

   },
   ["TW.h"] = {

name1 = "terawatt-hour", symbol = "TW⋅h", utype = "energy", scale = 3.6e15, default = "PJ", link = "Watt-hour",

   },
   ["TWh"] = {

name1 = "terawatt-hour", symbol = "TWh", utype = "energy", scale = 3.6e15, default = "PJ", link = "Watt-hour",

   },
   ["USgalatm"] = {

name1 = "US gallon-atmosphere", name1_us = "U.S. gallon-atmosphere", symbol = "US gal⋅atm", sym_us = "U.S. gal⋅atm", utype = "energy", scale = 383.5568490138, default = "J", link = "Atmosphere (unit)",

   },
   ["W.h"] = {

name1 = "watt-hour", symbol = "W⋅h", utype = "energy", scale = 3600, default = "kJ",

   },
   ["Wh"] = {

name1 = "watt-hour", symbol = "Wh", utype = "energy", scale = 3600, default = "kJ",

   },
   ["μerg"] = {

name1 = "microerg", symbol = "μerg", utype = "energy", scale = 1e-13, default = "nJ", link = "Erg",

   },
   ["μeV"] = {

name1 = "microelectronvolt", symbol = "μeV", utype = "energy", scale = 1.602176487e-25, default = "yJ", link = "Electronvolt",

   },
   ["μW.h"] = {

name1 = "microwatt-hour", symbol = "μW⋅h", utype = "energy", scale = 0.0036, default = "mJ", link = "Watt-hour",

   },
   ["μWh"] = {

name1 = "microwatt-hour", symbol = "μWh", utype = "energy", scale = 0.0036, default = "mJ", link = "Watt-hour",

   },
   ["-kW.h"] = {

target = "kW.h", link = "Kilowatt hour",

   },
   ["btu"] = {

target = "BTU",

   },
   ["Calorie"] = {

target = "Cal",

   },
   ["ft.lbf"] = {

target = "ftlbf",

   },
   ["ft·lbf"] = {

target = "ftlbf",

   },
   ["g-cal-15"] = {

target = "cal-15",

   },
   ["g-cal-IT"] = {

target = "cal-IT",

   },
   ["g-cal-th"] = {

target = "cal-th",

   },
   ["g-kcal-15"] = {

target = "kcal-15",

   },
   ["g-kcal-IT"] = {

target = "kcal-IT",

   },
   ["g-kcal-th"] = {

target = "kcal-th",

   },
   ["g-Mcal-15"] = {

target = "Mcal-15",

   },
   ["g-mcal-15"] = {

target = "mcal-15",

   },
   ["g-Mcal-IT"] = {

target = "Mcal-IT",

   },
   ["g-mcal-IT"] = {

target = "mcal-IT",

   },
   ["g-Mcal-th"] = {

target = "Mcal-th",

   },
   ["g-mcal-th"] = {

target = "mcal-th",

   },
   ["GW-h"] = {

target = "GW.h",

   },
   ["GW·h"] = {

target = "GW.h",

   },
   ["Hartree"] = {

target = "Eh",

   },
   ["hp.h"] = {

target = "hph",

   },
   ["in.lb-f"] = {

target = "inlb-f",

   },
   ["in.lbf"] = {

target = "inlbf",

   },
   ["in.oz-f"] = {

target = "inoz-f",

   },
   ["in.ozf"] = {

target = "inozf",

   },
   ["kbboe"] = {

target = "kBOE", symbol = "kbboe",

   },
   ["kg-cal-15"] = {

target = "Cal-15",

   },
   ["kg-cal-IT"] = {

target = "Cal-IT",

   },
   ["kg-cal-th"] = {

target = "Cal-th",

   },
   ["kW-h"] = {

target = "kW.h",

   },
   ["kW·h"] = {

target = "kW.h",

   },
   ["MW-h"] = {

target = "MW.h",

   },
   ["mW-h"] = {

target = "mW.h",

   },
   ["MW·h"] = {

target = "MW.h",

   },
   ["TW-h"] = {

target = "TW.h",

   },
   ["U.S.galatm"] = {

target = "USgalatm", sp_us = true,

   },
   ["uerg"] = {

target = "μerg",

   },
   ["ueV"] = {

target = "μeV",

   },
   ["usgalatm"] = {

target = "USgalatm",

   },
   ["uW-h"] = {

target = "μW.h",

   },
   ["uW.h"] = {

target = "μW.h",

   },
   ["uWh"] = {

target = "μWh",

   },
   ["W-h"] = {

target = "W.h",

   },
   ["eVpar"] = {

_name1 = "electronvolt", _symbol = "eV", utype = "energy per chemical amount", scale = 96485.329522144166, prefixes = 1, default = "kcal/mol", link = "Electronvolt",

   },
   ["kcal/mol"] = {

per = { "kcal", "mol" }, utype = "energy per chemical amount", default = "kJ/mol", link = "Kilocalorie per mole",

   },
   ["kJ/mol"] = {

per = { "kJ", "mol" }, utype = "energy per chemical amount", default = "kcal/mol", link = "Joule per mole",

   },
   ["kWh/100 km"] = {

name1 = "kilowatt-hour per 100 kilometres", name1_us = "kilowatt-hour per 100 kilometers", name2 = "kilowatt-hours per 100 kilometres", name2_us = "kilowatt-hours per 100 kilometers", symbol = "kW⋅h/100 km", utype = "energy per unit length", scale = 36, default = "MJ/km kWh/mi", link = "Watt-hour",

   },
   ["kWh/100 mi"] = {

name1 = "kilowatt-hour per 100 miles", name2 = "kilowatt-hours per 100 miles", symbol = "kW⋅h/100 mi", utype = "energy per unit length", scale = 22.3694, default = "mpge", link = "Miles per gallon gasoline equivalent",

   },
   ["MJ/100 km"] = {

name1 = "megajoule per 100 kilometres", name1_us = "megajoule per 100 kilometers", name2 = "megajoules per 100 kilometres", name2_us = "megajoules per 100 kilometers", symbol = "MJ/100 km", utype = "energy per unit length", scale = 10, default = "BTU/mi", link = "British thermal unit",

   },
   ["mpge"] = {

name1 = "mile per gallon gasoline equivalent", name2 = "miles per gallon gasoline equivalent", symbol = "mpg‑e", utype = "energy per unit length", scale = 13e-6, invert = -1, iscomplex= true, default = "kWh/100 mi", link = "Miles per gallon gasoline equivalent",

   },
   ["BTU/mi"] = {

per = { "BTU", "mi" }, utype = "energy per unit length", default = "v > 1525 ! M ! k ! J/km",

   },
   ["kJ/km"] = {

per = { "kJ", "km" }, utype = "energy per unit length", default = "BTU/mi",

   },
   ["kWh/km"] = {

per = { "-kW.h", "km" }, utype = "energy per unit length", default = "MJ/km kWh/mi",

   },
   ["kWh/mi"] = {

per = { "-kW.h", "mi" }, utype = "energy per unit length", default = "kWh/km MJ/km",

   },
   ["MJ/km"] = {

per = { "MJ", "km" }, utype = "energy per unit length", default = "BTU/mi",

   },
   ["mpg-e"] = {

target = "mpge",

   },
   ["BTU/lb"] = {

name1 = "British thermal unit per pound", name2 = "British thermal units per pound", symbol = "BTU/lb", utype = "energy per unit mass", scale = 429.92261414790346, default = "kJ/kg", link = "British thermal unit",

   },
   ["cal/g"] = {

name1 = "calorie per gram", name2 = "calories per gram", symbol = "cal/g", utype = "energy per unit mass", scale = 4184, default = "J/g",

   },
   ["GJ/kg"] = {

name1 = "gigajoule per kilogram", name2 = "gigajoules per kilogram", symbol = "GJ/kg", utype = "energy per unit mass", scale = 1e9, default = "ktTNT/t", link = "Specific energy",

   },
   ["J/g"] = {

name1 = "joule per gram", name2 = "joules per gram", symbol = "J/g", utype = "energy per unit mass", scale = 1000, default = "kcal/g", link = "Specific energy",

   },
   ["kcal/g"] = {

name1 = "kilocalorie per gram", name2 = "kilocalories per gram", symbol = "kcal/g", utype = "energy per unit mass", scale = 4184000, default = "kJ/g",

   },
   ["kJ/g"] = {

name1 = "kilojoule per gram", name2 = "kilojoules per gram", symbol = "kJ/g", utype = "energy per unit mass", scale = 1000000, default = "kcal/g", link = "Specific energy",

   },
   ["kJ/kg"] = {

name1 = "kilojoule per kilogram", name2 = "kilojoules per kilogram", symbol = "kJ/kg", utype = "energy per unit mass", scale = 1000, default = "BTU/lb", link = "Specific energy",

   },
   ["ktonTNT/MT"] = {

name2 = "kilotons of TNT per metric ton", symbol = "kiloton of TNT per metric ton", usename = 1, utype = "energy per unit mass", scale = 4184000000, default = "GJ/kg", link = "TNT equivalent",

   },
   ["ktTNT/t"] = {

name2 = "kilotonnes of TNT per tonne", symbol = "kilotonne of TNT per tonne", usename = 1, utype = "energy per unit mass", scale = 4184000000, default = "GJ/kg", link = "TNT equivalent",

   },
   ["MtonTNT/MT"] = {

name2 = "megatons of TNT per metric ton", symbol = "megaton of TNT per metric ton", usename = 1, utype = "energy per unit mass", scale = 4.184e12, default = "TJ/kg", link = "TNT equivalent",

   },
   ["MtTNT/MT"] = {

name2 = "megatonnes of TNT per tonne", symbol = "megatonne of TNT per tonne", usename = 1, utype = "energy per unit mass", scale = 4.184e12, default = "TJ/kg", link = "TNT equivalent",

   },
   ["TJ/kg"] = {

name1 = "terajoule per kilogram", name2 = "terajoules per kilogram", symbol = "TJ/kg", utype = "energy per unit mass", scale = 1e12, default = "MtTNT/MT", link = "Specific energy",

   },
   ["Cal/g"] = {

per = { "Cal", "g" }, utype = "energy per unit mass", default = "kJ/g",

   },
   ["BTU/cuft"] = {

per = { "BTU", "cuft" }, utype = "energy per unit volume", default = "kJ/L",

   },
   ["Cal/12USoz(mL)serve"] = {

per = { "Cal", "-12USoz(mL)serve" }, utype = "energy per unit volume", default = "kJ/L",

   },
   ["Cal/12USoz(ml)serve"] = {

per = { "Cal", "-12USoz(ml)serve" }, utype = "energy per unit volume", default = "kJ/l",

   },
   ["Cal/12USozserve"] = {

per = { "Cal", "-12USozserve" }, utype = "energy per unit volume", default = "kJ/L",

   },
   ["Cal/USoz"] = {

per = { "Cal", "USoz" }, utype = "energy per unit volume", default = "kJ/ml",

   },
   ["kJ/L"] = {

per = { "kJ", "L" }, utype = "energy per unit volume", default = "BTU/cuft",

   },
   ["kJ/l"] = {

per = { "kJ", "l" }, utype = "energy per unit volume", default = "BTU/cuft",

   },
   ["kJ/ml"] = {

per = { "kJ", "ml" }, utype = "energy per unit volume", default = "Cal/USoz",

   },
   ["MJ/m3"] = {

per = { "MJ", "m3" }, utype = "energy per unit volume", default = "BTU/cuft",

   },
   ["Sv"] = {

_name1 = "sievert", _symbol = "Sv", utype = "equivalent radiation dose", scale = 1, prefixes = 1, default = "rem", link = "Sievert",

   },
   ["rem"] = {

_name1 = "rem", _symbol = "rem", utype = "equivalent radiation dose", scale = 0.01, prefixes = 1, default = "Sv", link = "Roentgen equivalent man",

   },
   ["g/km"] = {

name1 = "gram per kilometre", name1_us = "gram per kilometer", name2 = "grams per kilometre", name2_us = "grams per kilometer", symbol = "g/km", utype = "exhaust emission", scale = 1e-6, default = "oz/mi", link = "Exhaust gas",

   },
   ["g/mi"] = {

name1 = "gram per mile", name2 = "grams per mile", symbol = "g/mi", utype = "exhaust emission", scale = 6.2137119223733397e-7, default = "g/km", link = "Exhaust gas",

   },
   ["gCO2/km"] = {

name1 = "gram of CO₂ per kilometre", name1_us = "gram of CO₂ per kilometer", name2 = "grams of CO₂ per kilometre", name2_us = "grams of CO₂ per kilometer", symbol = "g(CO₂)/km", utype = "exhaust emission", scale = 1e-6, default = "ozCO2/mi", link = "Exhaust gas",

   },
   ["gCO2/mi"] = {

name1 = "gram of CO₂ per mile", name2 = "grams of CO₂ per mile", symbol = "g(CO₂)/mi", utype = "exhaust emission", scale = 6.2137119223733397e-7, default = "gCO2/km", link = "Exhaust gas",

   },
   ["kg/km"] = {

name1 = "kilogram per kilometre", name1_us = "kilogram per kilometer", name2 = "kilograms per kilometre", name2_us = "kilograms per kilometer", symbol = "kg/km", utype = "exhaust emission", scale = 0.001, default = "lb/mi", link = "Exhaust gas",

   },
   ["kgCO2/km"] = {

name1 = "kilogram of CO₂ per kilometre", name1_us = "kilogram of CO₂ per kilometer", name2 = "kilograms of CO₂ per kilometre", name2_us = "kilograms of CO₂ per kilometer", symbol = "kg(CO₂)/km", utype = "exhaust emission", scale = 0.001, default = "lbCO2/mi", link = "Exhaust gas",

   },
   ["lb/mi"] = {

name1 = "pound per mile", name2 = "pounds per mile", symbol = "lb/mi", utype = "exhaust emission", scale = 0.00028184923173665794, default = "kg/km", link = "Exhaust gas",

   },
   ["lbCO2/mi"] = {

name1 = "pound of CO₂ per mile", name2 = "pounds of CO₂ per mile", symbol = "lb(CO₂)/mi", utype = "exhaust emission", scale = 0.00028184923173665794, default = "kgCO2/km", link = "Exhaust gas",

   },
   ["oz/mi"] = {

name1 = "ounce per mile", name2 = "ounces per mile", symbol = "oz/mi", utype = "exhaust emission", scale = 1.7615576983541121e-5, default = "g/km", link = "Exhaust gas",

   },
   ["ozCO2/mi"] = {

name1 = "ounce of CO₂ per mile", name2 = "ounces of CO₂ per mile", symbol = "oz(CO₂)/mi", utype = "exhaust emission", scale = 1.7615576983541121e-5, default = "gCO2/km", link = "Exhaust gas",

   },
   ["cuft/a"] = {

name1 = "cubic foot per annum", name2 = "cubic feet per annum", symbol = "cu ft/a", utype = "flow", scale = 8.9730672142368242e-10, default = "m3/a", link = "Cubic foot per second",

   },
   ["cuft/d"] = {

name1 = "cubic foot per day", name2 = "cubic feet per day", symbol = "cu ft/d", utype = "flow", scale = 3.2774128000000003e-7, default = "m3/d", link = "Cubic foot per second",

   },
   ["cuft/h"] = {

name1 = "cubic foot per hour", name2 = "cubic feet per hour", symbol = "cu ft/h", utype = "flow", scale = 7.8657907200000004e-6, default = "m3/h", link = "Cubic foot per second",

   },
   ["cuft/min"] = {

name1 = "cubic foot per minute", name2 = "cubic feet per minute", symbol = "cu ft/min", utype = "flow", scale = 0.00047194744319999999, default = "m3/min", link = "Cubic foot#cubic foot per second",

   },
   ["cuft/s"] = {

name1 = "cubic foot per second", name2 = "cubic feet per second", symbol = "cu ft/s", utype = "flow", scale = 28316846592e-12, default = "m3/s",

   },
   ["cumi/a"] = {

name1 = "cubic mile per annum", name2 = "cubic miles per annum", symbol = "cu mi/a", utype = "flow", scale = 132.08171170940057, default = "km3/a", link = "Cubic foot per second",

   },
   ["cuyd/h"] = {

name1 = "cubic yard per hour", name2 = "cubic yards per hour", symbol = "cuyd/h", utype = "flow", scale = 0.00021237634944000001, default = "m3/h", link = "Cubic foot per minute",

   },
   ["cuyd/s"] = {

name1 = "cubic yard per second", name2 = "cubic yards per second", symbol = "cu yd/s", utype = "flow", scale = 0.76455485798400002, default = "m3/s",

   },
   ["Goilbbl/a"] = {

name1 = "billion barrels per year", name2 = "billion barrels per year", symbol = "Gbbl/a", utype = "flow", scale = 5.0380033629933836, default = "v * 1.58987294928 < 10 ! e6 ! e9 ! m3/a", link = "Barrel per day",

   },
   ["impgal/h"] = {

name1 = "imperial gallon per hour", name2 = "imperial gallons per hour", symbol = "imp gal/h", utype = "flow", scale = 1.2628027777777779e-6, default = "m3/h", link = "Gallon",

   },
   ["impgal/min"] = {

name1 = "imperial gallon per minute", name2 = "imperial gallons per minute", symbol = "imp gal/min", utype = "flow", scale = 7.5768166666666671e-5, default = "m3/s", link = "Gallon",

   },
   ["impgal/s"] = {

name1 = "imperial gallon per second", name2 = "imperial gallons per second", symbol = "impgal/s", utype = "flow", scale = 0.00454609, default = "m3/s", link = "Imperial gallons per second",

   },
   ["km3/a"] = {

name1 = "cubic kilometre per annum", name1_us = "cubic kilometer per annum", name2 = "cubic kilometres per annum", name2_us = "cubic kilometers per annum", symbol = "km³/a", utype = "flow", scale = 31.68808781402895, default = "cumi/a", link = "Cubic metre per second",

   },
   ["km3/d"] = {

name1 = "cubic kilometre per day", name1_us = "cubic kilometer per day", name2 = "cubic kilometres per day", name2_us = "cubic kilometers per day", symbol = "km³/d", utype = "flow", scale = 11574.074074074075, default = "cuft/d", link = "Cubic metre per second",

   },
   ["koilbbl/a"] = {

name1 = "thousand barrels per year", name2 = "thousand barrels per year", symbol = "kbbl/a", utype = "flow", scale = 5.0380033629933841e-6, default = "v * 1.58987294928 < 10 ! ! e3 ! m3/a", link = "Barrel per day",

   },
   ["koilbbl/d"] = {

name1 = "thousand barrels per day", name2 = "thousand barrels per day", symbol = "kbbl/d", utype = "flow", scale = 0.0018401307283333335, default = "v * 1.58987294928 < 10 ! ! e3 ! m3/d", link = "Barrel per day",

   },
   ["L/h"] = {

name1 = "litre per hour", name1_us = "liter per hour", name2 = "litres per hour", name2_us = "liters per hour", symbol = "L/h", utype = "flow", scale = 2.7777777777777776e-7, default = "impgal/h USgal/h", link = "Cubic metre per second",

   },
   ["L/min"] = {

name1 = "litre per minute", name1_us = "liter per minute", name2 = "litres per minute", name2_us = "liters per minute", symbol = "L/min", utype = "flow", scale = 1.6666666666666667e-5, default = "impgal/min USgal/min", link = "Cubic metre per second",

   },
   ["L/s"] = {

name1 = "litre per second", name1_us = "liter per second", name2 = "litres per second", name2_us = "liters per second", symbol = "L/s", utype = "flow", scale = 0.001, default = "cuft/s", link = "Cubic metre per second",

   },
   ["m3/a"] = {

name1 = "cubic metre per annum", name1_us = "cubic meter per annum", name2 = "cubic metres per annum", name2_us = "cubic meters per annum", symbol = "m³/a", utype = "flow", scale = 3.1688087814028947e-8, default = "cuft/a", link = "Cubic metre per second",

   },
   ["m3/d"] = {

name1 = "cubic metre per day", name1_us = "cubic meter per day", name2 = "cubic metres per day", name2_us = "cubic meters per day", symbol = "m³/d", utype = "flow", scale = 1.1574074074074073e-5, default = "cuft/d", link = "Cubic metre per second",

   },
   ["m3/h"] = {

name1 = "cubic metre per hour", name1_us = "cubic meter per hour", name2 = "cubic metres per hour", name2_us = "cubic meters per hour", symbol = "m³/h", utype = "flow", scale = 0.00027777777777777778, default = "cuft/h", link = "Cubic metre per second",

   },
   ["m3/min"] = {

name1 = "cubic metre per minute", name1_us = "cubic meter per minute", name2 = "cubic metres per minute", name2_us = "cubic meters per minute", symbol = "m³/min", utype = "flow", scale = 0.016666666666666666, default = "cuft/min", link = "Cubic metre per second",

   },
   ["m3/s"] = {

name1 = "cubic metre per second", name1_us = "cubic meter per second", name2 = "cubic metres per second", name2_us = "cubic meters per second", symbol = "m³/s", utype = "flow", scale = 1, default = "cuft/s",

   },
   ["Moilbbl/a"] = {

name1 = "million barrels per year", name2 = "million barrels per year", symbol = "Mbbl/a", utype = "flow", scale = 0.0050380033629933837, default = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3/a", link = "Barrel per day",

   },
   ["Moilbbl/d"] = {

name1 = "million barrels per day", name2 = "million barrels per day", symbol = "Mbbl/d", utype = "flow", scale = 1.8401307283333335, default = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3/d", link = "Barrel per day",

   },
   ["oilbbl/a"] = {

name1 = "barrel per year", name2 = "barrels per year", symbol = "bbl/a", utype = "flow", scale = 5.0380033629933841e-9, default = "m3/a", link = "Barrel per day",

   },
   ["oilbbl/d"] = {

name1 = "barrel per day", name2 = "barrels per day", symbol = "bbl/d", utype = "flow", scale = 1.8401307283333336e-6, default = "m3/d",

   },
   ["Toilbbl/a"] = {

name1 = "trillion barrels per year", name2 = "trillion barrels per year", symbol = "Tbbl/a", utype = "flow", scale = 5038.0033629933832, default = "v * 1.58987294928 < 10 ! e9 ! e12 ! m3/a", link = "Barrel per day",

   },
   ["U.S.gal/d"] = {

name1 = "U.S. gallon per day", name2 = "U.S. gallons per day", symbol = "U.S. gal/d", utype = "flow", scale = 4.3812636388888893e-8, default = "m3/s", customary= 1,

   },
   ["U.S.gal/h"] = {

name1 = "gallon per hour", name2 = "gallons per hour", symbol = "gal/h", utype = "flow", scale = 1.0515032733333334e-6, default = "m3/h", link = "Gallon", customary= 2,

   },
   ["U.S.gal/min"] = {

name1 = "U.S. gallon per minute", name2 = "U.S. gallons per minute", symbol = "U.S. gal/min", utype = "flow", scale = 6.3090196400000003e-5, default = "m3/s", link = "Gallon",

   },
   ["USgal/a"] = {

name1 = "US gallon per year", name2 = "US gallons per year", symbol = "US gal/a", utype = "flow", scale = 1.1995246102365199e-10, default = "m3/s",

   },
   ["USgal/d"] = {

name1 = "US gallon per day", name2 = "US gallons per day", symbol = "US gal/d", utype = "flow", scale = 4.3812636388888893e-8, default = "m3/s",

   },
   ["USgal/h"] = {

name1 = "gallon per hour", name2 = "gallons per hour", symbol = "gal/h", utype = "flow", scale = 1.0515032733333334e-6, default = "m3/h", link = "Gallon", customary= 1,

   },
   ["USgal/min"] = {

name1 = "US gallon per minute", name2 = "US gallons per minute", symbol = "US gal/min", utype = "flow", scale = 6.3090196400000003e-5, default = "m3/s", link = "Gallon",

   },
   ["USgal/s"] = {

name1 = "US gallon per second", name1_us = "U.S. gallon per second", name2 = "US gallons per second", name2_us = "U.S. gallons per second", symbol = "USgal/s", utype = "flow", scale = 0.003785411784, default = "m3/s", link = "US gallons per second",

   },
   ["ft3/a"] = {

target = "cuft/a",

   },
   ["ft3/d"] = {

target = "cuft/d",

   },
   ["ft3/h"] = {

target = "cuft/h",

   },
   ["ft3/s"] = {

target = "cuft/s",

   },
   ["Gcuft/a"] = {

target = "e9cuft/a",

   },
   ["Gcuft/d"] = {

target = "e9cuft/d",

   },
   ["kcuft/a"] = {

target = "e3cuft/a",

   },
   ["kcuft/d"] = {

target = "e3cuft/d",

   },
   ["kcuft/s"] = {

target = "e3cuft/s",

   },
   ["Mcuft/a"] = {

target = "e6cuft/a",

   },
   ["Mcuft/d"] = {

target = "e6cuft/d",

   },
   ["Mcuft/s"] = {

target = "e6cuft/s",

   },
   ["m³/s"] = {

target = "m3/s",

   },
   ["Tcuft/a"] = {

target = "e12cuft/a",

   },
   ["Tcuft/d"] = {

target = "e12cuft/d",

   },
   ["u.s.gal/min"] = {

target = "U.S.gal/min",

   },
   ["usgal/min"] = {

target = "USgal/min",

   },
   ["-LTf"] = {

name1 = "long ton-force", name2 = "long tons-force", symbol = "LTf", utype = "force", scale = 9964.01641818352, default = "kN",

   },
   ["-STf"] = {

name1 = "short ton-force", name2 = "short tons-force", symbol = "STf", utype = "force", scale = 8896.443230521, default = "kN",

   },
   ["dyn"] = {

name1 = "dyne", symbol = "dyn", utype = "force", scale = 0.00001, default = "gr-f",

   },
   ["g-f"] = {

name1 = "gram-force", name2 = "grams-force", symbol = "g_f", utype = "force", scale = 0.00980665, default = "mN oz-f", link = "Kilogram-force",

   },
   ["gf"] = {

name1 = "gram-force", name2 = "grams-force", symbol = "gf", utype = "force", scale = 0.00980665, default = "mN ozf", link = "Kilogram-force",

   },
   ["gr-f"] = {

name1 = "grain-force", name2 = "grains-force", symbol = "gr_f", utype = "force", scale = 0.0006354602307515, default = "μN", link = "Pound (force)",

   },
   ["grf"] = {

name1 = "grain-force", name2 = "grains-force", symbol = "grf", utype = "force", scale = 0.0006354602307515, default = "μN", link = "Pound (force)",

   },
   ["kdyn"] = {

name1 = "kilodyne", symbol = "kdyn", utype = "force", scale = 0.01, default = "oz-f", link = "Dyne",

   },
   ["kg-f"] = {

name1 = "kilogram-force", name2 = "kilograms-force", symbol = "kg_f", utype = "force", scale = 9.80665, default = "N lb-f",

   },
   ["kgf"] = {

name1 = "kilogram-force", name2 = "kilograms-force", symbol = "kgf", utype = "force", scale = 9.80665, default = "N lbf",

   },
   ["kp"] = {

name1 = "kilopond", symbol = "kp", utype = "force", scale = 9.80665, default = "N lb-f", link = "Kilogram-force",

   },
   ["L/T-f"] = {

name1 = "long ton-force", name2 = "long tons-force", symbol = "L/T_f", utype = "force", scale = 9964.01641818352, default = "kN",

   },
   ["L/Tf"] = {

name1 = "long ton-force", name2 = "long tons-force", symbol = "L/Tf", utype = "force", scale = 9964.01641818352, default = "kN",

   },
   ["lb-f"] = {

name1 = "pound-force", name2 = "pounds-force", symbol = "lb_f", utype = "force", scale = 4.4482216152605, default = "N", link = "Pound (force)",

   },
   ["lbf"] = {

name1 = "pound-force", name2 = "pounds-force", symbol = "lbf", utype = "force", scale = 4.4482216152605, default = "N", link = "Pound (force)",

   },
   ["lb(f)"] = {

name1 = "pound", symbol = "lb", utype = "force", scale = 4.4482216152605, default = "N", link = "Pound (force)",

   },
   ["LT-f"] = {

name1 = "long ton-force", name2 = "long tons-force", symbol = "LT_f", utype = "force", scale = 9964.01641818352, default = "kN",

   },
   ["LTf"] = {

name1 = "long ton-force", name2 = "long tons-force", symbol = "LTf", usename = 1, utype = "force", scale = 9964.01641818352, default = "kN",

   },
   ["Mdyn"] = {

name1 = "megadyne", symbol = "Mdyn", utype = "force", scale = 10, default = "lb-f", link = "Dyne",

   },
   ["mdyn"] = {

name1 = "millidyne", symbol = "mdyn", utype = "force", scale = 0.00000001, default = "gr-f", link = "Dyne",

   },
   ["mg-f"] = {

name1 = "milligram-force", name2 = "milligrams-force", symbol = "mg_f", utype = "force", scale = 0.00000980665, default = "μN gr-f", link = "Kilogram-force",

   },
   ["mgf"] = {

name1 = "milligram-force", name2 = "milligrams-force", symbol = "mgf", utype = "force", scale = 0.00000980665, default = "μN grf", link = "Kilogram-force",

   },
   ["Mp"] = {

name1 = "megapond", symbol = "Mp", utype = "force", scale = 9806.65, default = "kN LT-f ST-f", link = "Kilogram-force",

   },
   ["mp"] = {

name1 = "millipond", symbol = "mp", utype = "force", scale = 0.00000980665, default = "μN gr-f", link = "Kilogram-force",

   },
   ["N"] = {

_name1 = "newton", _symbol = "N", utype = "force", scale = 1, prefixes = 1, default = "lb-f", link = "Newton (unit)",

   },
   ["oz-f"] = {

name1 = "ounce-force", name2 = "ounces-force", symbol = "oz_f", utype = "force", scale = 0.2780138203095378125, default = "mN", link = "Pound (force)",

   },
   ["ozf"] = {

name1 = "ounce-force", name2 = "ounces-force", symbol = "ozf", utype = "force", scale = 0.2780138203095378125, default = "mN", link = "Pound (force)",

   },
   ["p"] = {

name1 = "pond", symbol = "p", utype = "force", scale = 0.00980665, default = "mN oz-f", link = "Kilogram-force",

   },
   ["pdl"] = {

name1 = "poundal", symbol = "pdl", utype = "force", scale = 0.138254954376, default = "N",

   },
   ["S/T-f"] = {

name1 = "short ton-force", name2 = "short tons-force", symbol = "S/T_f", utype = "force", scale = 8896.443230521, default = "kN",

   },
   ["S/Tf"] = {

name1 = "short ton-force", name2 = "short tons-force", symbol = "S/Tf", utype = "force", scale = 8896.443230521, default = "kN",

   },
   ["ST-f"] = {

name1 = "short ton-force", name2 = "short tons-force", symbol = "ST_f", utype = "force", scale = 8896.443230521, default = "kN",

   },
   ["STf"] = {

name1 = "short ton-force", name2 = "short tons-force", symbol = "STf", usename = 1, utype = "force", scale = 8896.443230521, default = "kN",

   },
   ["t-f"] = {

name1 = "tonne-force", name2 = "tonnes-force", symbol = "t_f", utype = "force", scale = 9806.65, default = "kN LT-f ST-f", link = "Ton-force#Tonne-force",

   },
   ["tf"] = {

name1 = "tonne-force", name2 = "tonnes-force", symbol = "tf", utype = "force", scale = 9806.65, default = "kN LTf STf", link = "Ton-force#Tonne-force",

   },
   ["dyne"] = {

target = "dyn",

   },
   ["newtons"] = {

target = "N",

   },
   ["poundal"] = {

target = "pdl",

   },
   ["tonne-force"] = {

target = "tf",

   },
   ["impgal/mi"] = {

per = { "@impgal", "mi" }, utype = "fuel efficiency", invert = 1, iscomplex= true, default = "l/km USgal/mi",

   },
   ["km/L"] = {

per = { "km", "L" }, utype = "fuel efficiency", invert = -1, iscomplex= true, default = "mpgimp mpgus",

   },
   ["km/l"] = {

per = { "km", "l" }, utype = "fuel efficiency", invert = -1, iscomplex= true, default = "mpgimp mpgus",

   },
   ["L/100 km"] = {

per = { "L", "100km" }, utype = "fuel efficiency", invert = 1, iscomplex= true, default = "mpgimp mpgus", symlink = "L/100 km",

   },
   ["l/100 km"] = {

per = { "l", "100km" }, utype = "fuel efficiency", invert = 1, iscomplex= true, default = "mpgimp mpgus", symlink = "l/100 km",

   },
   ["L/km"] = {

per = { "L", "km" }, utype = "fuel efficiency", invert = 1, iscomplex= true, default = "mpgimp mpgus",

   },
   ["l/km"] = {

per = { "l", "km" }, utype = "fuel efficiency", invert = 1, iscomplex= true, default = "mpgimp mpgus",

   },
   ["mi/impqt"] = {

per = { "mi", "impqt" }, utype = "fuel efficiency", invert = -1, iscomplex= true, default = "km/L",

   },
   ["mi/U.S.qt"] = {

per = { "mi", "U.S.qt" }, utype = "fuel efficiency", invert = -1, iscomplex= true, default = "km/L",

   },
   ["mi/USqt"] = {

per = { "mi", "USqt" }, utype = "fuel efficiency", invert = -1, iscomplex= true, default = "km/L",

   },
   ["mi/usqt"] = {

per = { "mi", "usqt" }, utype = "fuel efficiency", invert = -1, iscomplex= true, default = "km/L",

   },
   ["mpgimp"] = {

per = { "mi", "@impgal" }, symbol = "mpg_‑imp", utype = "fuel efficiency", invert = -1, iscomplex= true, default = "L/100 km+mpgus", symlink = "mpg_‑imp",

   },
   ["mpgus"] = {

per = { "mi", "+USgal" }, symbol = "mpg_‑US", utype = "fuel efficiency", invert = -1, iscomplex= true, default = "L/100 km+mpgimp", symlink = "mpg_‑US",

   },
   ["U.S.gal/mi"] = {

per = { "*U.S.gal", "mi" }, sp_us = true, utype = "fuel efficiency", invert = 1, iscomplex= true, default = "l/km impgal/mi",

   },
   ["usgal/mi"] = {

per = { "+USgal", "mi" }, utype = "fuel efficiency", invert = 1, iscomplex= true, default = "l/km impgal/mi",

   },
   ["L/100km"] = {

target = "L/100 km",

   },
   ["l/100km"] = {

target = "l/100 km",

   },
   ["mpg"] = {

shouldbe = "Use %{mpgus%} for miles per US gallon or %{mpgimp%} for miles per imperial gallon (not %{mpg%})",

   },
   ["mpgU.S."] = {

target = "mpgus", symbol = "mpg_‑U.S.", sp_us = true, symlink = "mpg_‑U.S.",

   },
   ["mpgu.s."] = {

target = "mpgus", symbol = "mpg_‑U.S.", sp_us = true, symlink = "mpg_‑U.S.",

   },
   ["mpgUS"] = {

target = "mpgus",

   },
   ["USgal/mi"] = {

target = "usgal/mi",

   },
   ["kPa/m"] = {

per = { "kPa", "-m-frac" }, utype = "fracture gradient", default = "psi/ft",

   },
   ["psi/ft"] = {

per = { "psi", "-ft-frac" }, utype = "fracture gradient", default = "kPa/m",

   },
   ["cm/km"] = {

name1 = "centimetre per kilometre", name1_us = "centimeter per kilometer", name2 = "centimetres per kilometre", name2_us = "centimeters per kilometer", symbol = "cm/km", utype = "gradient", scale = 0.00001, default = "ft/mi", link = "Grade (slope)",

   },
   ["ft/mi"] = {

name1 = "foot per mile", name2 = "feet per mile", symbol = "ft/mi", utype = "gradient", scale = 0.00018939393939393939, default = "v < 5.28 ! c ! ! m/km", link = "Grade (slope)",

   },
   ["ft/nmi"] = {

name1 = "foot per nautical mile", name2 = "feet per nautical mile", symbol = "ft/nmi", utype = "gradient", scale = 0.00016457883369330455, default = "v < 6.076 ! c ! ! m/km", link = "Grade (slope)",

   },
   ["in/ft"] = {

name1 = "inch per foot", name2 = "inches per foot", symbol = "in/ft", utype = "gradient", scale = 0.083333333333333329, default = "mm/m", link = "Grade (slope)",

   },
   ["in/mi"] = {

name1 = "inch per mile", name2 = "inches per mile", symbol = "in/mi", utype = "gradient", scale = 1.5782828282828283e-5, default = "v < 0.6336 ! m ! c ! m/km", link = "Grade (slope)",

   },
   ["m/km"] = {

name1 = "metre per kilometre", name1_us = "meter per kilometer", name2 = "metres per kilometre", name2_us = "meters per kilometer", symbol = "m/km", utype = "gradient", scale = 0.001, default = "ft/mi", link = "Grade (slope)",

   },
   ["mm/km"] = {

name1 = "millimetre per kilometre", name1_us = "millimeter per kilometer", name2 = "millimetres per kilometre", name2_us = "millimeters per kilometer", symbol = "mm/km", utype = "gradient", scale = 0.000001, default = "in/mi", link = "Grade (slope)",

   },
   ["mm/m"] = {

name1 = "millimetre per metre", name1_us = "millimeter per meter", name2 = "millimetres per metre", name2_us = "millimeters per meter", symbol = "mm/m", utype = "gradient", scale = 0.001, default = "in/ft", link = "Grade (slope)",

   },
   ["admi"] = {

name1 = "admiralty mile", symbol = "nmi (admiralty)", utype = "length", scale = 1853.184, default = "km mi", link = "Nautical mile",

   },
   ["AU"] = {

name1 = "astronomical unit", symbol = "AU", utype = "length", scale = 149597870700, default = "km mi",

   },
   ["Brnmi"] = {

name1 = "British nautical mile", symbol = "(Brit) nmi", utype = "length", scale = 1853.184, default = "km mi", link = "Nautical mile",

   },
   ["bu"] = {

name2 = "bu", symbol = "bu", usename = 1, utype = "length", scale = 0.0030303030303030303, default = "mm", link = "Japanese units of measurement#Length",

   },
   ["ch"] = {

name1 = "chain", symbol = "ch", utype = "length", scale = 20.1168, default = "ft m", subdivs = { ["ft"] = { 66, default = "m" }, ["yd"] = { 22, default = "m" } }, link = "Chain (unit)",

   },
   ["chlk"] = {

name1 = "chain", symbol = "ch", utype = "length", scale = 20.1168, default = "ft m", link = "",

   },
   ["chain"] = {

symbol = "chain", usename = 1, utype = "length", scale = 20.1168, default = "ft m", subdivs = { ["ft"] = { 66, default = "m" }, ["yd"] = { 22, default = "m" } }, link = "Chain (unit)",

   },
   ["chainlk"] = {

symbol = "chain", usename = 1, utype = "length", scale = 20.1168, default = "ft m", link = "",

   },
   ["dpcm"] = {

name2 = "dot/cm", symbol = "dot/cm", utype = "length", scale = 100, invert = -1, iscomplex= true, default = "dpi", link = "Dots per inch",

   },
   ["dpi"] = {

name2 = "DPI", symbol = "DPI", utype = "length", scale = 39.370078740157481, invert = -1, iscomplex= true, default = "pitch", link = "Dots per inch",

   },
   ["fathom"] = {

symbol = "fathom", usename = 1, utype = "length", scale = 1.8288, default = "ft m",

   },
   ["foot"] = {

name1 = "foot", name2 = "foot", symbol = "ft", utype = "length", scale = 0.3048, default = "m", subdivs = { ["in"] = { 12, default = "m" } }, link = "Foot (unit)",

   },
   ["ft"] = {

name1 = "foot", name2 = "feet", symbol = "ft", utype = "length", scale = 0.3048, exception= "integer_more_precision", default = "m", subdivs = { ["in"] = { 12, default = "m" } }, link = "Foot (unit)",

   },
   ["furlong"] = {

symbol = "furlong", usename = 1, utype = "length", scale = 201.168, default = "ft m",

   },
   ["Gly"] = {

name1 = "gigalight-year", symbol = "Gly", utype = "length", scale = 9.4607304725808e24, default = "Mpc", link = "Light-year#Definitions",

   },
   ["Gpc"] = {

name1 = "gigaparsec", symbol = "Gpc", utype = "length", scale = 3.0856775814671916e25, default = "Gly", link = "Parsec#Megaparsecs and gigaparsecs",

   },
   ["hand"] = {

name1 = "hand", symbol = "h", utype = "length", builtin = "hand", scale = 0.1016, iscomplex= true, default = "in cm", link = "Hand (unit)",

   },
   ["in"] = {

name1 = "inch", name2 = "inches", symbol = "in", utype = "length", scale = 0.0254, exception= "subunit_more_precision", default = "mm",

   },
   ["inabbreviated"] = {

name2 = "in", symbol = "in", utype = "length", scale = 0.0254, default = "mm", link = "Inch",

   },
   ["kly"] = {

name1 = "kilolight-year", symbol = "kly", utype = "length", scale = 9.4607304725808e18, default = "pc", link = "Light-year#Definitions",

   },
   ["kpc"] = {

name1 = "kiloparsec", symbol = "kpc", utype = "length", scale = 3.0856775814671916e19, default = "kly", link = "Parsec#Parsecs and kiloparsecs",

   },
   ["LD"] = {

name1 = "lunar distance", symbol = "LD", utype = "length", scale = 384403000, default = "km mi", link = "Lunar distance (astronomy)",

   },
   ["league"] = {

symbol = "league", usename = 1, utype = "length", scale = 4828.032, default = "km", link = "League (unit)",

   },
   ["ly"] = {

name1 = "light-year", symbol = "ly", utype = "length", scale = 9.4607304725808e15, default = "AU",

   },
   ["m"] = {

_name1 = "metre", _name1_us= "meter", _symbol = "m", utype = "length", scale = 1, prefixes = 1, default = "v > 0 and v < 3 ! ftin ! ft", link = "Metre",

   },
   ["mi"] = {

name1 = "mile", symbol = "mi", utype = "length", scale = 1609.344, default = "km", subdivs = { ["ch"] = { 80, default = "km" }, ["chlk"] = { 80, default = "km" }, ["chain"] = { 80, default = "km" }, ["chainlk"] = { 80, default = "km" }, ["ft"] = { 5280, default = "km" }, ["furlong"] = { 8, default = "km" }, ["yd"] = { 1760, default = "km" } },

   },
   ["mil"] = {

symbol = "mil", usename = 1, utype = "length", scale = 0.0000254, default = "mm", link = "Thousandth of an inch",

   },
   ["Mly"] = {

name1 = "megalight-year", symbol = "Mly", utype = "length", scale = 9.4607304725808e21, default = "kpc", link = "Light-year#Definitions",

   },
   ["Mpc"] = {

name1 = "megaparsec", symbol = "Mpc", utype = "length", scale = 3.0856775814671916e22, default = "Mly", link = "Parsec#Megaparsecs and gigaparsecs",

   },
   ["NM"] = {

name1 = "nautical mile", symbol = "NM", utype = "length", scale = 1852, default = "km mi",

   },
   ["nmi"] = {

name1 = "nautical mile", symbol = "nmi", utype = "length", scale = 1852, default = "km mi",

   },
   ["oldUKnmi"] = {

name1 = "nautical mile", symbol = "nmi", utype = "length", scale = 1853.184, default = "km mi",

   },
   ["oldUSnmi"] = {

name1 = "nautical mile", symbol = "nmi", utype = "length", scale = 1853.24496, default = "km mi",

   },
   ["pc"] = {

name1 = "parsec", symbol = "pc", utype = "length", scale = 3.0856775814671916e16, default = "ly",

   },
   ["perch"] = {

name2 = "perches", symbol = "perch", usename = 1, utype = "length", scale = 5.0292, default = "ft m", link = "Rod (unit)",

   },
   ["pitch"] = {

name2 = "μm", symbol = "μm", utype = "length", scale = 1e-6, default = "dpi", defkey = "pitch", linkey = "pitch", link = "Dots per inch",

   },
   ["pole"] = {

symbol = "pole", usename = 1, utype = "length", scale = 5.0292, default = "ft m", link = "Rod (unit)",

   },
   ["pre1954U.S.nmi"] = {

name1 = "(pre-1954 U.S.) nautical mile", symbol = "(pre‑1954 U.S.) nmi", utype = "length", scale = 1853.24496, default = "km mi", link = "Nautical mile",

   },
   ["pre1954USnmi"] = {

name1 = "(pre-1954 US) nautical mile", name1_us = "(pre-1954 U.S.) nautical mile", symbol = "(pre‑1954 US) nmi", sym_us = "(pre‑1954 U.S.) nmi", utype = "length", scale = 1853.24496, default = "km mi", link = "Nautical mile",

   },
   ["rd"] = {

name1 = "rod", symbol = "rd", utype = "length", scale = 5.0292, default = "ft m", link = "Rod (unit)",

   },
   ["royal cubit"] = {

name1 = "royal cubit", symbol = "cu", utype = "length", scale = 0.524, default = "mm",

   },
   ["rtkm"] = {

name1 = "route kilometre", name1_us = "route kilometer", symbol = "km", utype = "length", scale = 1000, default = "mi", link = "Kilometre",

   },
   ["rtmi"] = {

name1 = "route mile", symbol = "mi", utype = "length", scale = 1609.344, default = "km", link = "Mile",

   },
   ["shaku"] = {

name2 = "shaku", symbol = "shaku", usename = 1, utype = "length", scale = 0.30303030303030304, default = "m", link = "Shaku (unit)",

   },
   ["sm"] = {

name1 = "smoot", symbol = "sm", utype = "length", scale = 1.70180, default = "m", link = "Smoot (unit)",

   },
   ["smi"] = {

name1 = "statute mile", symbol = "mi", utype = "length", scale = 1609.344, default = "km", subdivs = { ["chain"] = { 80, default = "km" } },

   },
   ["solar radius"] = {

name1 = "solar radius", name2 = "solar radii", symbol = "R_☉", utype = "length", scale = 695700e3, default = "km",

   },
   ["sun"] = {

name2 = "sun", symbol = "sun", usename = 1, utype = "length", scale = 0.030303030303030304, default = "mm", link = "Japanese units of measurement#Length",

   },
   ["thou"] = {

name2 = "thou", symbol = "thou", usename = 1, utype = "length", scale = 0.0000254, default = "mm", link = "Thousandth of an inch",

   },
   ["verst"] = {

symbol = "verst", usename = 1, utype = "length", scale = 1066.8, default = "km mi",

   },
   ["yd"] = {

name1 = "yard", symbol = "yd", utype = "length", scale = 0.9144, default = "m", subdivs = { ["ft"] = { 3, default = "m" } },

   },
   ["μin"] = {

name1 = "microinch", name2 = "microinches", symbol = "μin", utype = "length", scale = 0.0000000254, default = "nm", link = "SI prefix#Non-metric units",

   },
   ["Å"] = {

name1 = "ångström", symbol = "Å", utype = "length", scale = 0.0000000001, default = "in",

   },
   ["Hz"] = {

_name1 = "hertz", _name2 = "hertz", _symbol = "Hz", utype = "length", scale = 3.3356409519815204e-9, invert = -1, iscomplex= true, prefixes = 1, default = "m", link = "Hertz",

   },
   ["-ft-frac"] = {

target = "ft", link = "Fracture gradient",

   },
   ["-in-stiff"] = {

target = "in", link = "Stiffness",

   },
   ["-m-frac"] = {

target = "m", link = "Fracture gradient",

   },
   ["-m-stiff"] = {

target = "m", link = "Stiffness",

   },
   ["100km"] = {

target = "km", multiplier= 100,

   },
   ["admiralty nmi"] = {

target = "oldUKnmi",

   },
   ["angstrom"] = {

target = "Å",

   },
   ["au"] = {

target = "AU", symbol = "au",

   },
   ["feet"] = {

target = "ft",

   },
   ["hands"] = {

target = "hand",

   },
   ["inch"] = {

target = "in",

   },
   ["light-year"] = {

target = "ly",

   },
   ["meter"] = {

target = "m", sp_us = true,

   },
   ["meters"] = {

target = "m", sp_us = true,

   },
   ["metre"] = {

target = "m",

   },
   ["metres"] = {

target = "m",

   },
   ["micrometre"] = {

target = "μm",

   },
   ["micron"] = {

target = "μm", default = "μin",

   },
   ["mile"] = {

target = "mi",

   },
   ["miles"] = {

target = "mi",

   },
   ["parsec"] = {

target = "pc",

   },
   ["rod"] = {

target = "rd",

   },
   ["smoot"] = {

target = "sm",

   },
   ["uin"] = {

target = "μin",

   },
   ["yard"] = {

target = "yd",

   },
   ["yards"] = {

target = "yd",

   },
   ["yds"] = {

target = "yd",

   },
   ["dtex"] = {

name1 = "decitex", name2 = "decitex", symbol = "dtex", utype = "linear density", scale = 1e-7, default = "lb/yd", link = "Units of textile measurement#Tex",

   },
   ["kg/cm"] = {

name1 = "kilogram per centimetre", name1_us = "kilogram per centimeter", name2 = "kilograms per centimetre", name2_us = "kilograms per centimeter", symbol = "kg/cm", utype = "linear density", scale = 100, default = "lb/yd", link = "Linear density",

   },
   ["kg/m"] = {

name1 = "kilogram per metre", name1_us = "kilogram per meter", name2 = "kilograms per metre", name2_us = "kilograms per meter", symbol = "kg/m", utype = "linear density", scale = 1, default = "lb/yd", link = "Linear density",

   },
   ["lb/ft"] = {

name1 = "pound per foot", name2 = "pounds per foot", symbol = "lb/ft", utype = "linear density", scale = 1.4881639435695539, default = "kg/m", link = "Linear density",

   },
   ["lb/yd"] = {

name1 = "pound per yard", name2 = "pounds per yard", symbol = "lb/yd", utype = "linear density", scale = 0.49605464785651798, default = "kg/m", link = "Linear density",

   },
   ["G"] = {

_name1 = "gauss", _name2 = "gauss", _symbol = "G", utype = "magnetic field strength", scale = 0.0001, prefixes = 1, default = "T", link = "Gauss (unit)",

   },
   ["T"] = {

_name1 = "tesla", _symbol = "T", utype = "magnetic field strength", scale = 1, prefixes = 1, default = "G", link = "Tesla (unit)",

   },
   ["A/m"] = {

name1 = "ampere per metre", name1_us = "ampere per meter", name2 = "amperes per metre", name2_us = "amperes per meter", symbol = "A/m", utype = "magnetizing field", scale = 1, default = "Oe", link = "Magnetic field#Units",

   },
   ["kA/m"] = {

name1 = "kiloampere per metre", name1_us = "kiloampere per meter", name2 = "kiloamperes per metre", name2_us = "kiloamperes per meter", symbol = "kA/m", utype = "magnetizing field", scale = 1000, default = "kOe", link = "Magnetic field#Units",

   },
   ["MA/m"] = {

name1 = "megaampere per metre", name1_us = "megaampere per meter", name2 = "megaamperes per metre", name2_us = "megaamperes per meter", symbol = "MA/m", utype = "magnetizing field", scale = 1e6, default = "kOe", link = "Magnetic field#Units",

   },
   ["Oe"] = {

_name1 = "oersted", _symbol = "Oe", utype = "magnetizing field", scale = 79.5774715, prefixes = 1, default = "kA/m", link = "Oersted",

   },
   ["-Lcwt"] = {

name1 = "hundredweight", name2 = "hundredweight", symbol = "cwt", utype = "mass", scale = 50.80234544, default = "lb",

   },
   ["-Scwt"] = {

name1 = "hundredweight", name2 = "hundredweight", symbol = "cwt", utype = "mass", scale = 45.359237, default = "lb",

   },
   ["-ST"] = {

name1 = "short ton", symbol = "ST", utype = "mass", scale = 907.18474, default = "t",

   },
   ["carat"] = {

symbol = "carat", usename = 1, utype = "mass", scale = 0.0002, default = "g", link = "Carat (mass)",

   },
   ["drachm"] = {

name1_us = "dram", symbol = "drachm", usename = 1, utype = "mass", scale = 0.001771845195, default = "g", link = "Dram (unit)",

   },
   ["dram"] = {

target = "drachm",

   },
   ["dwt"] = {

name1 = "pennyweight", symbol = "dwt", utype = "mass", scale = 0.00155517384, default = "oz g",

   },
   ["DWton"] = {

symbol = "deadweight ton", usename = 1, utype = "mass", scale = 1016.0469088, default = "DWtonne", link = "Tonnage",

   },
   ["DWtonne"] = {

symbol = "deadweight tonne", usename = 1, utype = "mass", scale = 1000, default = "DWton", link = "Tonnage",

   },
   ["g"] = {

_name1 = "gram", _symbol = "g", utype = "mass", scale = 0.001, prefixes = 1, default = "oz", link = "Gram",

   },
   ["gr"] = {

name1 = "grain", symbol = "gr", utype = "mass", scale = 0.00006479891, default = "g", link = "Grain (unit)",

   },
   ["Gt"] = {

name1 = "gigatonne", symbol = "Gt", utype = "mass", scale = 1000000000000, default = "LT ST", link = "Tonne",

   },
   ["impgalh2o"] = {

name1 = "imperial gallon of water", name2 = "imperial gallons of water", symbol = "imp gal H₂O", utype = "mass", scale = 4.5359236999999499, default = "lb kg", link = "Imperial gallon",

   },
   ["kt"] = {

name1 = "kilotonne", symbol = "kt", utype = "mass", scale = 1000000, default = "LT ST", link = "Tonne",

   },
   ["lb"] = {

name1 = "pound", symbol = "lb", utype = "mass", scale = 0.45359237, exception= "integer_more_precision", default = "kg", subdivs = { ["oz"] = { 16, default = "kg" } }, link = "Pound (mass)",

   },
   ["Lcwt"] = {

name1 = "long hundredweight", name2 = "long hundredweight", symbol = "Lcwt", usename = 1, utype = "mass", scale = 50.80234544, default = "lb", subdivs = { ["qtr"] = { 4, default = "kg" }, ["st"] = { 8, default = "kg" } }, link = "Hundredweight",

   },
   ["long cwt"] = {

name1 = "long hundredweight", name2 = "long hundredweight", symbol = "long cwt", utype = "mass", scale = 50.80234544, default = "lb kg", subdivs = { ["qtr"] = { 4, default = "kg" } }, link = "Hundredweight",

   },
   ["long qtr"] = {

name1 = "long quarter", symbol = "long qtr", utype = "mass", scale = 12.70058636, default = "lb kg", link = "Avoirdupois",

   },
   ["LT"] = {

symbol = "long ton", usename = 1, utype = "mass", scale = 1016.0469088, default = "t", subdivs = { ["Lcwt"] = { 20, default = "t", unit = "-Lcwt" } },

   },
   ["lt"] = {

name1 = "long ton", symbol = "LT", utype = "mass", scale = 1016.0469088, default = "t", subdivs = { ["Lcwt"] = { 20, default = "t", unit = "-Lcwt" } },

   },
   ["metric ton"] = {

symbol = "metric ton", usename = 1, utype = "mass", scale = 1000, default = "long ton", link = "Tonne",

   },
   ["MT"] = {

name1 = "metric ton", symbol = "t", utype = "mass", scale = 1000, default = "LT ST", link = "Tonne",

   },
   ["Mt"] = {

name1 = "megatonne", symbol = "Mt", utype = "mass", scale = 1000000000, default = "LT ST", link = "Tonne",

   },
   ["oz"] = {

name1 = "ounce", symbol = "oz", utype = "mass", scale = 0.028349523125, default = "g",

   },
   ["ozt"] = {

name1 = "troy ounce", symbol = "ozt", utype = "mass", scale = 0.0311034768, default = "oz g",

   },
   ["pdr"] = {

name1 = "pounder", symbol = "pdr", utype = "mass", scale = 0.45359237, default = "kg", link = "Pound (mass)",

   },
   ["qtr"] = {

name1 = "quarter", symbol = "qtr", utype = "mass", scale = 12.70058636, default = "lb kg", subdivs = { ["lb"] = { 28, default = "kg" } }, link = "Avoirdupois",

   },
   ["Scwt"] = {

name1 = "short hundredweight", name2 = "short hundredweight", symbol = "Scwt", usename = 1, utype = "mass", scale = 45.359237, default = "lb", link = "Hundredweight",

   },
   ["short cwt"] = {

name1 = "short hundredweight", name2 = "short hundredweight", symbol = "short cwt", utype = "mass", scale = 45.359237, default = "lb kg", link = "Hundredweight",

   },
   ["short qtr"] = {

name1 = "short quarter", symbol = "short qtr", utype = "mass", scale = 11.33980925, default = "lb kg", link = "Avoirdupois",

   },
   ["ST"] = {

symbol = "short ton", usename = 1, utype = "mass", scale = 907.18474, default = "t", subdivs = { ["Scwt"] = { 20, default = "t", unit = "-Scwt" } },

   },
   ["shtn"] = {

name1 = "short ton", symbol = "sh tn", utype = "mass", scale = 907.18474, default = "t",

   },
   ["shton"] = {

symbol = "ton", usename = 1, utype = "mass", scale = 907.18474, default = "t",

   },
   ["solar mass"] = {

name1 = "solar mass", name2 = "solar masses", symbol = "M_☉", utype = "mass", scale = 1.98855e30, default = "kg",

   },
   ["st"] = {

name1 = "stone", name2 = "stone", symbol = "st", utype = "mass", scale = 6.35029318, default = "lb kg", subdivs = { ["lb"] = { 14, default = "kg lb" } }, link = "Stone (unit)",

   },
   ["t"] = {

name1 = "tonne", name1_us = "metric ton", symbol = "t", utype = "mass", scale = 1000, default = "LT ST",

   },
   ["tonne"] = {

name1 = "tonne", name1_us = "metric ton", symbol = "t", utype = "mass", scale = 1000, default = "shton",

   },
   ["troy pound"] = {

symbol = "troy pound", usename = 1, utype = "mass", scale = 0.3732417216, default = "lb kg", link = "Troy weight",

   },
   ["usgalh2o"] = {

name1 = "US gallon of water", name1_us = "U.S. gallon of water", name2 = "US gallons of water", name2_us = "U.S. gallons of water", symbol = "US gal H₂O", utype = "mass", scale = 3.7776215836051126, default = "lb kg", link = "United States customary units#Fluid volume",

   },
   ["viss"] = {

name2 = "viss", symbol = "viss", utype = "mass", scale = 1.632932532, default = "kg", link = "Myanmar units of measurement#Mass",

   },
   ["billion tonne"] = {

target = "e9t",

   },
   ["kilogram"] = {

target = "kg",

   },
   ["kilotonne"] = {

target = "kt",

   },
   ["lbs"] = {

target = "lb",

   },
   ["lbt"] = {

target = "troy pound",

   },
   ["lcwt"] = {

target = "Lcwt",

   },
   ["long ton"] = {

target = "LT",

   },
   ["mcg"] = {

target = "μg",

   },
   ["million tonne"] = {

target = "e6t",

   },
   ["scwt"] = {

target = "Scwt",

   },
   ["short ton"] = {

target = "ST",

   },
   ["stone"] = {

target = "st",

   },
   ["thousand tonne"] = {

target = "e3t",

   },
   ["tonnes"] = {

target = "t",

   },
   ["kg/kW"] = {

name1 = "kilogram per kilowatt", name2 = "kilograms per kilowatt", symbol = "kg/kW", utype = "mass per unit power", scale = 0.001, default = "lb/hp", link = "Kilowatt",

   },
   ["lb/hp"] = {

name1 = "pound per horsepower", name2 = "pounds per horsepower", symbol = "lb/hp", utype = "mass per unit power", scale = 0.00060827738784176115, default = "kg/kW", link = "Horsepower",

   },
   ["kg/h"] = {

per = { "kg", "h" }, utype = "mass per unit time", default = "lb/h",

   },
   ["lb/h"] = {

per = { "lb", "h" }, utype = "mass per unit time", default = "kg/h",

   },
   ["g-mol/d"] = {

name1 = "gram-mole per day", name2 = "gram-moles per day", symbol = "g‑mol/d", utype = "molar rate", scale = 1.1574074074074073e-5, default = "μmol/s", link = "Mole (unit)",

   },
   ["g-mol/h"] = {

name1 = "gram-mole per hour", name2 = "gram-moles per hour", symbol = "g‑mol/h", utype = "molar rate", scale = 0.00027777777777777778, default = "mmol/s", link = "Mole (unit)",

   },
   ["g-mol/min"] = {

name1 = "gram-mole per minute", name2 = "gram-moles per minute", symbol = "g‑mol/min", utype = "molar rate", scale = 0.016666666666666666, default = "g-mol/s", link = "Mole (unit)",

   },
   ["g-mol/s"] = {

name1 = "gram-mole per second", name2 = "gram-moles per second", symbol = "g‑mol/s", utype = "molar rate", scale = 1, default = "lb-mol/min", link = "Mole (unit)",

   },
   ["gmol/d"] = {

name1 = "gram-mole per day", name2 = "gram-moles per day", symbol = "gmol/d", utype = "molar rate", scale = 1.1574074074074073e-5, default = "μmol/s", link = "Mole (unit)",

   },
   ["gmol/h"] = {

name1 = "gram-mole per hour", name2 = "gram-moles per hour", symbol = "gmol/h", utype = "molar rate", scale = 0.00027777777777777778, default = "mmol/s", link = "Mole (unit)",

   },
   ["gmol/min"] = {

name1 = "gram-mole per minute", name2 = "gram-moles per minute", symbol = "gmol/min", utype = "molar rate", scale = 0.016666666666666666, default = "gmol/s", link = "Mole (unit)",

   },
   ["gmol/s"] = {

name1 = "gram-mole per second", name2 = "gram-moles per second", symbol = "gmol/s", utype = "molar rate", scale = 1, default = "lbmol/min", link = "Mole (unit)",

   },
   ["kmol/d"] = {

name1 = "kilomole per day", name2 = "kilomoles per day", symbol = "kmol/d", utype = "molar rate", scale = 0.011574074074074073, default = "mmol/s", link = "Mole (unit)",

   },
   ["kmol/h"] = {

name1 = "kilomole per hour", name2 = "kilomoles per hour", symbol = "kmol/h", utype = "molar rate", scale = 0.27777777777777779, default = "mol/s", link = "Mole (unit)",

   },
   ["kmol/min"] = {

name1 = "kilomole per minute", name2 = "kilomoles per minute", symbol = "kmol/min", utype = "molar rate", scale = 16.666666666666668, default = "mol/s", link = "Kilomole (unit)",

   },
   ["kmol/s"] = {

name1 = "kilomole per second", name2 = "kilomoles per second", symbol = "kmol/s", utype = "molar rate", scale = 1000, default = "lb-mol/s", link = "Mole (unit)",

   },
   ["lb-mol/d"] = {

name1 = "pound-mole per day", name2 = "pound-moles per day", symbol = "lb‑mol/d", utype = "molar rate", scale = 0.0052499116898148141, default = "mmol/s", link = "Mole (unit)#Other units called \"mole\"",

   },
   ["lb-mol/h"] = {

name1 = "pound-mole per hour", name2 = "pound-moles per hour", symbol = "lb‑mol/h", utype = "molar rate", scale = 0.12599788055555555, default = "mol/s", link = "Mole (unit)#Other units called \"mole\"",

   },
   ["lb-mol/min"] = {

name1 = "pound-mole per minute", name2 = "pound-moles per minute", symbol = "lb‑mol/min", utype = "molar rate", scale = 7.5598728333333334, default = "mol/s", link = "Mole (unit)#Other units called \"mole\"",

   },
   ["lb-mol/s"] = {

name1 = "pound-mole per second", name2 = "pound-moles per second", symbol = "lb‑mol/s", utype = "molar rate", scale = 453.59237, default = "kmol/s", link = "Mole (unit)#Other units called \"mole\"",

   },
   ["lbmol/d"] = {

name1 = "pound-mole per day", name2 = "pound-moles per day", symbol = "lbmol/d", utype = "molar rate", scale = 0.0052499116898148141, default = "mmol/s", link = "Mole (unit)#Other units called \"mole\"",

   },
   ["lbmol/h"] = {

name1 = "pound-mole per hour", name2 = "pound-moles per hour", symbol = "lbmol/h", utype = "molar rate", scale = 0.12599788055555555, default = "mol/s", link = "Mole (unit)#Other units called \"mole\"",

   },
   ["lbmol/min"] = {

name1 = "pound-mole per minute", name2 = "pound-moles per minute", symbol = "lbmol/min", utype = "molar rate", scale = 7.5598728333333334, default = "mol/s", link = "Mole (unit)#Other units called \"mole\"",

   },
   ["lbmol/s"] = {

name1 = "pound-mole per second", name2 = "pound-moles per second", symbol = "lbmol/s", utype = "molar rate", scale = 453.59237, default = "kmol/s", link = "Mole (unit)#Other units called \"mole\"",

   },
   ["mmol/s"] = {

name1 = "millimole per second", name2 = "millimoles per second", symbol = "mmol/s", utype = "molar rate", scale = 0.001, default = "lb-mol/d", link = "Mole (unit)",

   },
   ["mol/d"] = {

name1 = "mole per day", name2 = "moles per day", symbol = "mol/d", utype = "molar rate", scale = 1.1574074074074073e-5, default = "μmol/s", link = "Mole (unit)",

   },
   ["mol/h"] = {

name1 = "mole per hour", name2 = "moles per hour", symbol = "mol/h", utype = "molar rate", scale = 0.00027777777777777778, default = "mmol/s", link = "Mole (unit)",

   },
   ["mol/min"] = {

name1 = "mole per minute", name2 = "moles per minute", symbol = "mol/min", utype = "molar rate", scale = 0.016666666666666666, default = "mol/s", link = "Mole (unit)",

   },
   ["mol/s"] = {

name1 = "mole per second", name2 = "moles per second", symbol = "mol/s", utype = "molar rate", scale = 1, default = "lb-mol/min", link = "Mole (unit)",

   },
   ["μmol/s"] = {

name1 = "micromole per second", name2 = "micromoles per second", symbol = "μmol/s", utype = "molar rate", scale = 0.000001, default = "lb-mol/d", link = "Mole (unit)",

   },
   ["umol/s"] = {

target = "μmol/s",

   },
   ["/acre"] = {

name1 = "per acre", name2 = "per acre", symbol = "/acre", utype = "per unit area", scale = 0.00024710538146716532, default = "/ha", link = "Acre",

   },
   ["/ha"] = {

name1 = "per hectare", name2 = "per hectare", symbol = "/ha", utype = "per unit area", scale = 100e-6, default = "/acre", link = "Hectare",

   },
   ["/sqcm"] = {

name1 = "per square centimetre", name1_us = "per square centimeter", name2 = "per square centimetre", name2_us = "per square centimeter", symbol = "/cm²", utype = "per unit area", scale = 1e4, default = "/sqin", link = "Square centimetre",

   },
   ["/sqin"] = {

name1 = "per square inch", name2 = "per square inch", symbol = "/in²", utype = "per unit area", scale = 1550.0031000062002, default = "/sqcm", link = "Square inch",

   },
   ["/sqkm"] = {

name1 = "per square kilometre", name1_us = "per square kilometer", name2 = "per square kilometre", name2_us = "per square kilometer", symbol = "/km²", utype = "per unit area", scale = 1e-6, default = "/sqmi", link = "Square kilometre",

   },
   ["/sqmi"] = {

name1 = "per square mile", name2 = "per square mile", symbol = "/sq mi", utype = "per unit area", scale = 3.8610215854244582e-7, default = "/sqkm", link = "Square mile",

   },
   ["PD/acre"] = {

name1 = "inhabitant per acre", name2 = "inhabitants per acre", symbol = "/acre", utype = "per unit area", scale = 0.00024710538146716532, default = "PD/ha", link = "Acre",

   },
   ["PD/ha"] = {

name1 = "inhabitant per hectare", name2 = "inhabitants per hectare", symbol = "/ha", utype = "per unit area", scale = 100e-6, default = "PD/acre", link = "Hectare",

   },
   ["PD/sqkm"] = {

name1 = "inhabitant per square kilometre", name1_us = "inhabitant per square kilometer", name2 = "inhabitants per square kilometre", name2_us = "inhabitants per square kilometer", symbol = "/km²", utype = "per unit area", scale = 1e-6, default = "PD/sqmi", link = "Square kilometre",

   },
   ["PD/sqmi"] = {

name1 = "inhabitant per square mile", name2 = "inhabitants per square mile", symbol = "/sq mi", utype = "per unit area", scale = 3.8610215854244582e-7, default = "PD/sqkm", link = "Square mile",

   },
   ["/cm2"] = {

target = "/sqcm",

   },
   ["/in2"] = {

target = "/sqin",

   },
   ["/km2"] = {

target = "/sqkm",

   },
   ["pd/acre"] = {

target = "PD/acre",

   },
   ["pd/ha"] = {

target = "PD/ha",

   },
   ["PD/km2"] = {

target = "PD/sqkm",

   },
   ["pd/km2"] = {

target = "PD/sqkm",

   },
   ["PD/km²"] = {

target = "PD/sqkm",

   },
   ["pd/sqkm"] = {

target = "PD/sqkm",

   },
   ["pd/sqmi"] = {

target = "PD/sqmi",

   },
   ["/l"] = {

name1 = "per litre", name1_us = "per liter", name2 = "per litre", name2_us = "per liter", symbol = "/l", utype = "per unit volume", scale = 1000, default = "/usgal", link = "Litre",

   },
   ["/USgal"] = {

name1 = "per gallon", name2 = "per gallon", symbol = "/gal", utype = "per unit volume", scale = 264.172052, default = "/l", link = "US gallon", customary= 2,

   },
   ["/usgal"] = {

target = "/USgal",

   },
   ["bhp"] = {

name1 = "brake horsepower", name2 = "brake horsepower", symbol = "bhp", utype = "power", scale = 745.69987158227022, default = "kW", link = "Horsepower#Brake horsepower",

   },
   ["Cal/d"] = {

name1 = "large calorie per day", name2 = "large calories per day", symbol = "Cal/d", utype = "power", scale = 0.048425925925925928, default = "kJ/d", link = "Calorie",

   },
   ["Cal/h"] = {

name1 = "large calorie per hour", name2 = "large calories per hour", symbol = "Cal/h", utype = "power", scale = 1.1622222222222223, default = "kJ/h", link = "Calorie",

   },
   ["cal/h"] = {

name1 = "calorie per hour", name2 = "calories per hour", symbol = "cal/h", utype = "power", scale = 0.0011622222222222223, default = "W", link = "Calorie",

   },
   ["CV"] = {

name1 = "metric horsepower", name2 = "metric horsepower", symbol = "CV", utype = "power", scale = 735.49875, default = "kW",

   },
   ["hk"] = {

name1 = "metric horsepower", name2 = "metric horsepower", symbol = "hk", utype = "power", scale = 735.49875, default = "kW",

   },
   ["hp"] = {

name1 = "horsepower", name2 = "horsepower", symbol = "hp", utype = "power", scale = 745.69987158227022, default = "kW",

   },
   ["hp-electric"] = {

name1 = "electric horsepower", name2 = "electric horsepower", symbol = "hp", utype = "power", scale = 746, default = "kW", link = "Horsepower#Electrical horsepower",

   },
   ["hp-electrical"] = {

name1 = "electrical horsepower", name2 = "electrical horsepower", symbol = "hp", utype = "power", scale = 746, default = "kW", link = "Horsepower#Electrical horsepower",

   },
   ["hp-metric"] = {

name1 = "metric horsepower", name2 = "metric horsepower", symbol = "hp", utype = "power", scale = 735.49875, default = "kW",

   },
   ["ihp"] = {

name1 = "indicated horsepower", name2 = "indicated horsepower", symbol = "ihp", utype = "power", scale = 745.69987158227022, default = "kW", link = "Horsepower#Indicated horsepower",

   },
   ["kcal/h"] = {

name1 = "kilocalorie per hour", name2 = "kilocalories per hour", symbol = "kcal/h", utype = "power", scale = 1.1622222222222223, default = "kW", link = "Calorie",

   },
   ["kJ/d"] = {

name1 = "kilojoule per day", name2 = "kilojoules per day", symbol = "kJ/d", utype = "power", scale = 0.011574074074074073, default = "Cal/d", link = "Kilojoule",

   },
   ["kJ/h"] = {

name1 = "kilojoule per hour", name2 = "kilojoules per hour", symbol = "kJ/h", utype = "power", scale = 0.27777777777777779, default = "W", link = "Kilojoule",

   },
   ["PS"] = {

name1 = "metric horsepower", name2 = "metric horsepower", symbol = "PS", utype = "power", scale = 735.49875, default = "kW",

   },
   ["shp"] = {

name1 = "shaft horsepower", name2 = "shaft horsepower", symbol = "shp", utype = "power", scale = 745.69987158227022, default = "kW", link = "Horsepower#Shaft horsepower",

   },
   ["W"] = {

_name1 = "watt", _symbol = "W", utype = "power", scale = 1, prefixes = 1, default = "hp", link = "Watt",

   },
   ["BTU/h"] = {

per = { "BTU", "h" }, utype = "power", default = "W",

   },
   ["Btu/h"] = {

per = { "Btu", "h" }, utype = "power", default = "W",

   },
   ["BHP"] = {

target = "bhp",

   },
   ["btu/h"] = {

target = "BTU/h",

   },
   ["HP"] = {

target = "hp",

   },
   ["Hp"] = {

target = "hp",

   },
   ["hp-mechanical"] = {

target = "hp",

   },
   ["IHP"] = {

target = "ihp",

   },
   ["SHP"] = {

target = "shp",

   },
   ["whp"] = {

target = "hp",

   },
   ["hp/lb"] = {

name1 = "horsepower per pound", name2 = "horsepower per pound", symbol = "hp/lb", utype = "power per unit mass", scale = 1643.986806, default = "kW/kg", link = "Power-to-weight ratio",

   },
   ["hp/LT"] = {

name1 = "horsepower per long ton", name2 = "horsepower per long ton", symbol = "hp/LT", utype = "power per unit mass", scale = 0.73392268125000004, default = "kW/t", link = "Power-to-weight ratio",

   },
   ["hp/ST"] = {

name1 = "horsepower per short ton", name2 = "horsepower per short ton", symbol = "hp/ST", utype = "power per unit mass", scale = 0.821993403, default = "kW/t", link = "Power-to-weight ratio",

   },
   ["hp/t"] = {

name1 = "horsepower per tonne", name2 = "horsepower per tonne", symbol = "hp/t", utype = "power per unit mass", scale = 0.74569987158227022, default = "kW/t", link = "Power-to-weight ratio",

   },
   ["kW/kg"] = {

name1 = "kilowatt per kilogram", name2 = "kilowatts per kilogram", symbol = "kW/kg", utype = "power per unit mass", scale = 1000, default = "hp/lb", link = "Power-to-weight ratio",

   },
   ["kW/t"] = {

name1 = "kilowatt per tonne", name2 = "kilowatts per tonne", symbol = "kW/t", utype = "power per unit mass", scale = 1, default = "PS/t", link = "Power-to-weight ratio",

   },
   ["PS/t"] = {

name1 = "metric horsepower per tonne", name2 = "metric horsepower per tonne", symbol = "PS/t", utype = "power per unit mass", scale = 0.73549875, default = "kW/t", link = "Power-to-weight ratio",

   },
   ["shp/lb"] = {

name1 = "shaft horsepower per pound", name2 = "shaft horsepower per pound", symbol = "shp/lb", utype = "power per unit mass", scale = 1643.986806, default = "kW/kg", link = "Power-to-weight ratio",

   },
   ["hp/tonne"] = {

target = "hp/t", symbol = "hp/tonne", default = "kW/tonne",

   },
   ["kW/tonne"] = {

target = "kW/t", symbol = "kW/tonne",

   },
   ["-lb/in2"] = {

name1 = "pound per square inch", name2 = "pounds per square inch", symbol = "lb/in²", utype = "pressure", scale = 6894.7572931683608, default = "kPa kgf/cm2", link = "Pounds per square inch",

   },
   ["atm"] = {

name1 = "standard atmosphere", symbol = "atm", utype = "pressure", scale = 101325, default = "kPa", link = "Atmosphere (unit)",

   },
   ["Ba"] = {

name1 = "barye", symbol = "Ba", utype = "pressure", scale = 0.1, default = "Pa",

   },
   ["bar"] = {

symbol = "bar", utype = "pressure", scale = 100000, default = "kPa", link = "Bar (unit)",

   },
   ["dbar"] = {

name1 = "decibar", symbol = "dbar", utype = "pressure", scale = 10000, default = "kPa", link = "Bar (unit)",

   },
   ["inHg"] = {

name1 = "inch of mercury", name2 = "inches of mercury", symbol = "inHg", utype = "pressure", scale = 3386.388640341, default = "kPa",

   },
   ["kBa"] = {

name1 = "kilobarye", symbol = "kBa", utype = "pressure", scale = 100, default = "hPa", link = "Barye",

   },
   ["kg-f/cm2"] = {

name1 = "kilogram-force per square centimetre", name1_us = "kilogram-force per square centimeter", name2 = "kilograms-force per square centimetre", name2_us = "kilograms-force per square centimeter", symbol = "kg_f/cm²", utype = "pressure", scale = 98066.5, default = "psi", link = "Kilogram-force",

   },
   ["kg/cm2"] = {

name1 = "kilogram per square centimetre", name1_us = "kilogram per square centimeter", name2 = "kilograms per square centimetre", name2_us = "kilograms per square centimeter", symbol = "kg/cm²", utype = "pressure", scale = 98066.5, default = "psi", link = "Kilogram-force",

   },
   ["kgf/cm2"] = {

name1 = "kilogram-force per square centimetre", name1_us = "kilogram-force per square centimeter", name2 = "kilograms-force per square centimetre", name2_us = "kilograms-force per square centimeter", symbol = "kgf/cm²", utype = "pressure", scale = 98066.5, default = "psi", link = "Kilogram-force",

   },
   ["ksi"] = {

name1 = "kilopound per square inch", name2 = "kilopounds per square inch", symbol = "ksi", utype = "pressure", scale = 6894757.2931683613, default = "MPa", link = "Pounds per square inch",

   },
   ["lbf/in2"] = {

name1 = "pound-force per square inch", name2 = "pounds-force per square inch", symbol = "lbf/in²", utype = "pressure", scale = 6894.7572931683608, default = "kPa kgf/cm2", link = "Pounds-force per square inch",

   },
   ["mb"] = {

name1 = "millibar", symbol = "mb", utype = "pressure", scale = 100, default = "hPa", link = "Bar (unit)",

   },
   ["mbar"] = {

name1 = "millibar", symbol = "mbar", utype = "pressure", scale = 100, default = "hPa", link = "Bar (unit)",

   },
   ["mmHg"] = {

name1 = "millimetre of mercury", name1_us = "millimeter of mercury", name2 = "millimetres of mercury", name2_us = "millimeters of mercury", symbol = "mmHg", utype = "pressure", scale = 133.322387415, default = "kPa", link = "Millimeter of mercury",

   },
   ["Pa"] = {

_name1 = "pascal", _symbol = "Pa", utype = "pressure", scale = 1, prefixes = 1, default = "psi", link = "Pascal (unit)",

   },
   ["psf"] = {

name1 = "pound per square foot", name2 = "pounds per square foot", symbol = "psf", utype = "pressure", scale = 47.880258980335839, default = "kPa", link = "Pounds per square inch",

   },
   ["psi"] = {

name1 = "pound per square inch", name2 = "pounds per square inch", symbol = "psi", utype = "pressure", scale = 6894.7572931683608, default = "kPa", link = "Pounds per square inch",

   },
   ["Torr"] = {

name1 = "torr", symbol = "Torr", utype = "pressure", scale = 133.32236842105263, default = "kPa",

   },
   ["N/cm2"] = {

per = { "N", "cm2" }, utype = "pressure", default = "psi",

   },
   ["N/m2"] = {

per = { "N", "m2" }, utype = "pressure", default = "psi",

   },
   ["g/cm2"] = {

per = { "g", "cm2" }, utype = "pressure", default = "lb/sqft", multiplier= 9.80665,

   },
   ["g/m2"] = {

per = { "g", "m2" }, utype = "pressure", default = "lb/sqft", multiplier= 9.80665,

   },
   ["kg/ha"] = {

per = { "kg", "ha" }, utype = "pressure", default = "lb/acre", multiplier= 9.80665,

   },
   ["kg/m2"] = {

per = { "kg", "m2" }, utype = "pressure", default = "lb/sqft", multiplier= 9.80665,

   },
   ["lb/1000sqft"] = {

per = { "lb", "1000sqft" }, utype = "pressure", default = "g/m2", multiplier= 9.80665,

   },
   ["lb/acre"] = {

per = { "lb", "acre" }, utype = "pressure", default = "kg/ha", multiplier= 9.80665,

   },
   ["lb/sqft"] = {

per = { "lb", "sqft" }, utype = "pressure", default = "kg/m2", multiplier= 9.80665,

   },
   ["lb/sqyd"] = {

per = { "lb", "sqyd" }, utype = "pressure", default = "kg/m2", multiplier= 9.80665,

   },
   ["LT/acre"] = {

per = { "LT", "acre" }, utype = "pressure", default = "t/ha", multiplier= 9.80665,

   },
   ["MT/ha"] = {

per = { "MT", "ha" }, utype = "pressure", default = "LT/acre ST/acre", multiplier= 9.80665,

   },
   ["oz/sqft"] = {

per = { "oz", "sqft" }, utype = "pressure", default = "g/m2", multiplier= 9.80665,

   },
   ["oz/sqyd"] = {

per = { "oz", "sqyd" }, utype = "pressure", default = "g/m2", multiplier= 9.80665,

   },
   ["ST/acre"] = {

per = { "ST", "acre" }, utype = "pressure", default = "t/ha", multiplier= 9.80665,

   },
   ["t/ha"] = {

per = { "t", "ha" }, utype = "pressure", default = "LT/acre ST/acre", multiplier= 9.80665,

   },
   ["tonne/acre"] = {

per = { "tonne", "acre" }, utype = "pressure", default = "tonne/ha", multiplier= 9.80665,

   },
   ["tonne/ha"] = {

per = { "tonne", "ha" }, utype = "pressure", default = "tonne/acre", multiplier= 9.80665,

   },
   ["kgfpsqcm"] = {

target = "kgf/cm2",

   },
   ["kgpsqcm"] = {

target = "kg/cm2",

   },
   ["kN/m2"] = {

target = "kPa",

   },
   ["lb/in2"] = {

target = "lbf/in2",

   },
   ["torr"] = {

target = "Torr",

   },
   ["Bq"] = {

_name1 = "becquerel", _symbol = "Bq", utype = "radioactivity", scale = 1, prefixes = 1, default = "pCi", link = "Becquerel",

   },
   ["Ci"] = {

_name1 = "curie", _symbol = "Ci", utype = "radioactivity", scale = 3.7e10, prefixes = 1, default = "GBq", link = "Curie",

   },
   ["Rd"] = {

_name1 = "rutherford", _symbol = "Rd", utype = "radioactivity", scale = 1e6, prefixes = 1, default = "MBq", link = "Rutherford (unit)",

   },
   ["cm/h"] = {

name1 = "centimetre per hour", name1_us = "centimeter per hour", name2 = "centimetres per hour", name2_us = "centimeters per hour", symbol = "cm/h", utype = "speed", scale = 2.7777777777777775e-6, default = "in/h", link = "Metre per second",

   },
   ["cm/s"] = {

name1 = "centimetre per second", name1_us = "centimeter per second", name2 = "centimetres per second", name2_us = "centimeters per second", symbol = "cm/s", utype = "speed", scale = 0.01, default = "in/s", link = "Metre per second",

   },
   ["cm/year"] = {

name1 = "centimetre per year", name1_us = "centimeter per year", name2 = "centimetres per year", name2_us = "centimeters per year", symbol = "cm/year", utype = "speed", scale = 3.168873850681143e-10, default = "in/year", link = "Orders of magnitude (speed)",

   },
   ["foot/s"] = {

name1 = "foot per second", name2 = "foot per second", symbol = "ft/s", utype = "speed", scale = 0.3048, default = "m/s",

   },
   ["ft/min"] = {

name1 = "foot per minute", name2 = "feet per minute", symbol = "ft/min", utype = "speed", scale = 0.00508, default = "m/min", link = "Feet per second",

   },
   ["ft/s"] = {

name1 = "foot per second", name2 = "feet per second", symbol = "ft/s", utype = "speed", scale = 0.3048, default = "m/s", link = "Feet per second",

   },
   ["furlong per fortnight"] = {

name2 = "furlongs per fortnight", symbol = "furlong per fortnight", usename = 1, utype = "speed", scale = 0.00016630952380952381, default = "km/h mph", link = "FFF system",

   },
   ["in/h"] = {

name1 = "inch per hour", name2 = "inches per hour", symbol = "in/h", utype = "speed", scale = 7.0555555555555559e-6, default = "cm/h", link = "Inch",

   },
   ["in/s"] = {

name1 = "inch per second", name2 = "inches per second", symbol = "in/s", utype = "speed", scale = 0.0254, default = "cm/s", link = "Inch",

   },
   ["in/year"] = {

name1 = "inch per year", name2 = "inches per year", symbol = "in/year", utype = "speed", scale = 8.0489395807301024e-10, default = "cm/year", link = "Orders of magnitude (speed)",

   },
   ["isp"] = {

name1 = "second", symbol = "s", utype = "speed", scale = 9.80665, default = "km/s", link = "Specific impulse",

   },
   ["km/d"] = {

name1 = "kilometre per day", name1_us = "kilometer per day", name2 = "kilometres per day", name2_us = "kilometers per day", symbol = "km/d", utype = "speed", scale = 1.1574074074074074e-2, default = "mi/d", link = "Orders of magnitude (speed)",

   },
   ["km/h"] = {

name1 = "kilometre per hour", name1_us = "kilometer per hour", name2 = "kilometres per hour", name2_us = "kilometers per hour", symbol = "km/h", utype = "speed", scale = 0.27777777777777779, default = "mph", link = "Kilometres per hour",

   },
   ["km/s"] = {

name1 = "kilometre per second", name1_us = "kilometer per second", name2 = "kilometres per second", name2_us = "kilometers per second", symbol = "km/s", utype = "speed", scale = 1000, default = "mi/s", link = "Metre per second",

   },
   ["kn"] = {

name1 = "knot", symbol = "kn", utype = "speed", scale = 0.51444444444444448, default = "km/h mph", link = "Knot (unit)",

   },
   ["kNs/kg"] = {

name2 = "kN‑s/kg", symbol = "kN‑s/kg", utype = "speed", scale = 1000, default = "isp", link = "Specific impulse",

   },
   ["m/min"] = {

name1 = "metre per minute", name1_us = "meter per minute", name2 = "metres per minute", name2_us = "meters per minute", symbol = "m/min", utype = "speed", scale = 0.016666666666666666, default = "ft/min", link = "Metre per second",

   },
   ["m/s"] = {

name1 = "metre per second", name1_us = "meter per second", name2 = "metres per second", name2_us = "meters per second", symbol = "m/s", utype = "speed", scale = 1, default = "ft/s",

   },
   ["Mach"] = {

name2 = "Mach", symbol = "Mach", utype = "speed", builtin = "mach", scale = 0, iscomplex= true, default = "km/h mph", link = "Mach number",

   },
   ["mi/d"] = {

name1 = "mile per day", name2 = "miles per day", symbol = "mi/d", utype = "speed", scale = 1.8626666666666667e-2, default = "km/d", link = "Orders of magnitude (speed)",

   },
   ["mi/s"] = {

name1 = "mile per second", name2 = "miles per second", symbol = "mi/s", utype = "speed", scale = 1609.344, default = "km/s", link = "Mile",

   },
   ["mm/h"] = {

name1 = "millimetre per hour", name1_us = "millimeter per hour", name2 = "millimetres per hour", name2_us = "millimeters per hour", symbol = "mm/h", utype = "speed", scale = 2.7777777777777781e-7, default = "in/h", link = "Metre per second",

   },
   ["mph"] = {

name1 = "mile per hour", name2 = "miles per hour", symbol = "mph", utype = "speed", scale = 0.44704, default = "km/h", link = "Miles per hour",

   },
   ["Ns/kg"] = {

name2 = "N‑s/kg", symbol = "N‑s/kg", utype = "speed", scale = 1, default = "isp", link = "Specific impulse",

   },
   ["si tsfc"] = {

name2 = "g/(kN⋅s)", symbol = "g/(kN⋅s)", utype = "speed", scale = 9.9999628621379242e-7, invert = -1, iscomplex= true, default = "tsfc", link = "Thrust specific fuel consumption",

   },
   ["tsfc"] = {

name2 = "lb/(lbf⋅h)", symbol = "lb/(lbf⋅h)", utype = "speed", scale = 2.832545036049801e-5, invert = -1, iscomplex= true, default = "si tsfc", link = "Thrust specific fuel consumption",

   },
   ["cm/y"] = {

target = "cm/year",

   },
   ["cm/yr"] = {

target = "cm/year",

   },
   ["in/y"] = {

target = "in/year",

   },
   ["in/yr"] = {

target = "in/year",

   },
   ["knot"] = {

target = "kn",

   },
   ["knots"] = {

target = "kn",

   },
   ["kph"] = {

target = "km/h",

   },
   ["mi/h"] = {

target = "mph",

   },
   ["mm/s"] = {

per = { "mm", "s" }, utype = "speed", default = "in/s", link = "Metre per second",

   },
   ["C"] = {

name1 = "degree Celsius", name2 = "degrees Celsius", symbol = "°C", usesymbol= 1, utype = "temperature", scale = 1, offset = -273.15, iscomplex= true, istemperature= true, default = "F", link = "Celsius",

   },
   ["F"] = {

name1 = "degree Fahrenheit", name2 = "degrees Fahrenheit", symbol = "°F", usesymbol= 1, utype = "temperature", scale = 0.55555555555555558, offset = 32-273.15*(9/5), iscomplex= true, istemperature= true, default = "C", link = "Fahrenheit",

   },
   ["K"] = {

_name1 = "kelvin", _symbol = "K", usesymbol= 1, utype = "temperature", scale = 1, offset = 0, iscomplex= true, istemperature= true, prefixes = 1, default = "C F", link = "Kelvin",

   },
   ["keVT"] = {

name1 = "kiloelectronvolt", symbol = "keV", utype = "temperature", scale = 11.604505e6, offset = 0, iscomplex= true, default = "MK", link = "Electronvolt",

   },
   ["R"] = {

name1 = "degree Rankine", name2 = "degrees Rankine", symbol = "°R", usesymbol= 1, utype = "temperature", scale = 0.55555555555555558, offset = 0, iscomplex= true, istemperature= true, default = "K F C", link = "Rankine scale",

   },
   ["Celsius"] = {

target = "C",

   },
   ["°C"] = {

target = "C",

   },
   ["°F"] = {

target = "F",

   },
   ["°R"] = {

target = "R",

   },
   ["C-change"] = {

name1 = "degree Celsius change", name2 = "degrees Celsius change", symbol = "°C", usesymbol= 1, utype = "temperature change", scale = 1, default = "F-change", link = "Celsius",

   },
   ["F-change"] = {

name1 = "degree Fahrenheit change", name2 = "degrees Fahrenheit change", symbol = "°F", usesymbol= 1, utype = "temperature change", scale = 0.55555555555555558, default = "C-change", link = "Fahrenheit",

   },
   ["K-change"] = {

name1 = "kelvin change", name2 = "kelvins change", symbol = "K", usesymbol= 1, utype = "temperature change", scale = 1, default = "F-change", link = "Kelvin",

   },
   ["°C-change"] = {

target = "C-change",

   },
   ["°F-change"] = {

target = "F-change",

   },
   ["century"] = {

name1 = "century", name2 = "centuries", symbol = "ha", utype = "time", scale = 3155760000, default = "Gs",

   },
   ["d"] = {

name1 = "day", symbol = "d", utype = "time", scale = 86400, default = "ks",

   },
   ["decade"] = {

name1 = "decade", symbol = "daa", utype = "time", scale = 315576000, default = "Ms",

   },
   ["dog year"] = {

name1 = "dog year", symbol = "dog yr", utype = "time", scale = 220903200, default = "years", link = "List of unusual units of measurement#Dog year",

   },
   ["fortnight"] = {

symbol = "fortnight", usename = 1, utype = "time", scale = 1209600, default = "week",

   },
   ["h"] = {

name1 = "hour", symbol = "h", utype = "time", scale = 3600, default = "ks",

   },
   ["long billion year"] = {

name1 = "billion years", name2 = "billion years", symbol = "Ta", utype = "time", scale = 31557600000000000000, default = "Es", link = "Annum",

   },
   ["millennium"] = {

name1 = "millennium", name2 = "millennia", symbol = "ka", utype = "time", scale = 31557600000, default = "Gs",

   },
   ["milliard year"] = {

name1 = "milliard years", name2 = "milliard years", symbol = "Ga", utype = "time", scale = 31557600000000000, default = "Ps", link = "Annum",

   },
   ["million year"] = {

name1 = "million years", name2 = "million years", symbol = "Ma", utype = "time", scale = 31557600000000, default = "Ts", link = "Annum",

   },
   ["min"] = {

name1 = "minute", symbol = "min", utype = "time", scale = 60, default = "s",

   },
   ["month"] = {

symbol = "month", usename = 1, utype = "time", scale = 2629800, default = "Ms",

   },
   ["months"] = {

name1 = "month", symbol = "mo", utype = "time", scale = 2629800, default = "year",

   },
   ["s"] = {

_name1 = "second", _symbol = "s", utype = "time", scale = 1, prefixes = 1, default = "min", link = "Second",

   },
   ["short billion year"] = {

name1 = "billion years", name2 = "billion years", symbol = "Ga", utype = "time", scale = 31557600000000000, default = "Ps", link = "Annum",

   },
   ["short trillion year"] = {

name1 = "trillion years", name2 = "trillion years", symbol = "Ta", utype = "time", scale = 31557600000000000000, default = "Es", link = "Annum",

   },
   ["thousand million year"] = {

name1 = "thousand million years", name2 = "thousand million years", symbol = "Ga", utype = "time", scale = 31557600000000000, default = "Ps", link = "Annum",

   },
   ["wk"] = {

symbol = "week", usename = 1, utype = "time", scale = 604800, default = "Ms",

   },
   ["year"] = {

name1 = "year", symbol = "a", utype = "time", scale = 31557600, default = "Ms", link = "Annum",

   },
   ["years"] = {

name1 = "year", symbol = "yr", utype = "time", scale = 31557600, default = "Ms", link = "Annum",

   },
   ["byr"] = {

target = "short billion year",

   },
   ["day"] = {

target = "d",

   },
   ["days"] = {

target = "d",

   },
   ["dog yr"] = {

target = "dog year",

   },
   ["Gyr"] = {

target = "thousand million year",

   },
   ["hour"] = {

target = "h",

   },
   ["hours"] = {

target = "h",

   },
   ["kMyr"] = {

target = "thousand million year",

   },
   ["kmyr"] = {

target = "thousand million year",

   },
   ["kyr"] = {

target = "millennium",

   },
   ["long byr"] = {

target = "long billion year",

   },
   ["minute"] = {

target = "min",

   },
   ["minutes"] = {

target = "min",

   },
   ["mth"] = {

target = "month",

   },
   ["Myr"] = {

target = "million year",

   },
   ["myr"] = {

target = "million year",

   },
   ["second"] = {

target = "s",

   },
   ["seconds"] = {

target = "s",

   },
   ["tmyr"] = {

target = "thousand million year",

   },
   ["tryr"] = {

target = "short trillion year",

   },
   ["tyr"] = {

target = "millennium",

   },
   ["week"] = {

target = "wk",

   },
   ["weeks"] = {

target = "wk",

   },
   ["yr"] = {

target = "year",

   },
   ["kg.m"] = {

name1 = "kilogram metre", name1_us = "kilogram meter", symbol = "kg⋅m", utype = "torque", scale = 9.80665, default = "Nm lbft", link = "Kilogram metre (torque)",

   },
   ["kgf.m"] = {

name1 = "kilogram force-metre", name1_us = "kilogram force-meter", symbol = "kgf⋅m", utype = "torque", scale = 9.80665, default = "Nm lbfft", link = "Kilogram metre (torque)",

   },
   ["kgm"] = {

name1 = "kilogram metre", name1_us = "kilogram meter", symbol = "kg⋅m", utype = "torque", scale = 9.80665, default = "Nm lbfft", link = "Kilogram metre (torque)",

   },
   ["lb-fft"] = {

name1 = "pound force-foot", name2 = "pound force-feet", symbol = "ft⋅lb_f", utype = "torque", scale = 1.3558179483314004, default = "Nm", link = "Pound-foot (torque)",

   },
   ["lb.ft"] = {

name1 = "pound force-foot", name2 = "pound force-feet", symbol = "lb⋅ft", utype = "torque", scale = 1.3558179483314004, default = "Nm", link = "Pound-foot (torque)",

   },
   ["lb.in"] = {

name1 = "pound force-inch", symbol = "lb⋅in", utype = "torque", scale = 0.1129848290276167, default = "mN.m", link = "Pound-foot (torque)",

   },
   ["lbfft"] = {

name1 = "pound force-foot", name2 = "pound force-feet", symbol = "lbf⋅ft", utype = "torque", scale = 1.3558179483314004, default = "Nm", link = "Pound-foot (torque)",

   },
   ["lbft"] = {

name1 = "pound-foot", name2 = "pound-feet", symbol = "lb⋅ft", utype = "torque", scale = 1.3558179483314004, default = "Nm", link = "Pound-foot (torque)",

   },
   ["m.kg-f"] = {

name1 = "metre kilogram-force", name1_us = "meter kilogram-force", name2 = "metre kilograms-force", name2_us = "meter kilograms-force", symbol = "m⋅kg_f", utype = "torque", scale = 9.80665, default = "Nm lbfft", link = "Kilogram metre (torque)",

   },
   ["m.kgf"] = {

name1 = "metre kilogram-force", name1_us = "meter kilogram-force", name2 = "metre kilograms-force", name2_us = "meter kilograms-force", symbol = "m⋅kgf", utype = "torque", scale = 9.80665, default = "Nm lbfft", link = "Kilogram metre (torque)",

   },
   ["mN.m"] = {

name1 = "millinewton metre", name1_us = "millinewton meter", symbol = "mN⋅m", utype = "torque", scale = 0.001, default = "lb.in", link = "Newton metre",

   },
   ["Nm"] = {

_name1 = "newton metre", _name1_us= "newton meter", _symbol = "N⋅m", utype = "torque", alttype = "energy", scale = 1, prefixes = 1, default = "lbfft", link = "Newton metre",

   },
   ["kN/m"] = {

per = { "kN", "-m-stiff" }, utype = "torque", default = "lbf/in",

   },
   ["lbf/in"] = {

per = { "lbf", "-in-stiff" }, utype = "torque", default = "kN/m",

   },
   ["lb-f.ft"] = {

target = "lb-fft",

   },
   ["lbf.ft"] = {

target = "lbfft",

   },
   ["lbf·ft"] = {

target = "lbfft",

   },
   ["lb·ft"] = {

target = "lb.ft",

   },
   ["mkg-f"] = {

target = "m.kg-f",

   },
   ["mkgf"] = {

target = "m.kgf",

   },
   ["N.m"] = {

target = "Nm",

   },
   ["N·m"] = {

target = "Nm",

   },
   ["-12USoz(mL)serve"] = {

name1_us = "12 U.S. fl oz (355 mL) serving", symbol = "12 US fl oz (355 mL) serving", sym_us = "12 U.S. fl oz (355 mL) serving", utype = "volume", scale = 0.00035488235475000004, default = "mL", link = "Beverage can#Standard sizes",

   },
   ["-12USoz(ml)serve"] = {

name1_us = "12 U.S. fl oz (355 ml) serving", symbol = "12 US fl oz (355 ml) serving", sym_us = "12 U.S. fl oz (355 ml) serving", utype = "volume", scale = 0.00035488235475000004, default = "ml", link = "Beverage can#Standard sizes",

   },
   ["-12USozserve"] = {

name1_us = "12 U.S. fl oz serving", symbol = "12 US fl oz serving", sym_us = "12 U.S. fl oz serving", utype = "volume", scale = 0.00035488235475000004, default = "mL", link = "Beverage can#Standard sizes",

   },
   ["acre foot"] = {

name1 = "acre foot", name2 = "acre foot", symbol = "acre⋅ft", utype = "volume", scale = 1233.48183754752, default = "m3",

   },
   ["acre ft"] = {

name1 = "acre foot", name2 = "acre feet", symbol = "acre⋅ft", utype = "volume", scale = 1233.48183754752, default = "m3",

   },
   ["AUtbsp"] = {

name1 = "Australian tablespoon", symbol = "AU tbsp", utype = "volume", scale = 0.000020, default = "ml",

   },
   ["Bcuft"] = {

name1 = "billion cubic foot", name2 = "billion cubic feet", symbol = "billion cu ft", utype = "volume", scale = 28316846.592, default = "Gl", link = "Cubic foot",

   },
   ["bdft"] = {

name1 = "board foot", name2 = "board feet", symbol = "bd ft", utype = "volume", scale = 0.0023597372167, default = "m3",

   },
   ["board feet"] = {

name2 = "board feet", symbol = "board foot", usename = 1, utype = "volume", scale = 0.0023597372167, default = "m3",

   },
   ["board foot"] = {

name2 = "board foot", symbol = "board foot", usename = 1, utype = "volume", scale = 0.0023597372167, default = "m3",

   },
   ["cc"] = {

name1 = "cubic centimetre", name1_us = "cubic centimeter", symbol = "cc", utype = "volume", scale = 0.000001, default = "cuin",

   },
   ["CID"] = {

name1 = "cubic inch", name2 = "cubic inches", symbol = "cu in", utype = "volume", scale = 0.000016387064, default = "cc", link = "Cubic inch#Engine displacement",

   },
   ["cord"] = {

symbol = "cord", utype = "volume", scale = 3.624556363776, default = "m3", link = "Cord (unit)",

   },
   ["cufoot"] = {

name1 = "cubic foot", name2 = "cubic foot", symbol = "cu ft", utype = "volume", scale = 0.028316846592, default = "m3",

   },
   ["cuft"] = {

name1 = "cubic foot", name2 = "cubic feet", symbol = "cu ft", utype = "volume", scale = 0.028316846592, default = "m3",

   },
   ["cuin"] = {

name1 = "cubic inch", name2 = "cubic inches", symbol = "cu in", utype = "volume", scale = 0.000016387064, default = "cm3",

   },
   ["cumi"] = {

name1 = "cubic mile", symbol = "cu mi", utype = "volume", scale = 4168181825.440579584, default = "km3",

   },
   ["cuyd"] = {

name1 = "cubic yard", symbol = "cu yd", utype = "volume", scale = 0.764554857984, default = "m3",

   },
   ["firkin"] = {

symbol = "firkin", usename = 1, utype = "volume", scale = 0.04091481, default = "l impgal USgal", link = "Firkin (unit)",

   },
   ["foot3"] = {

target = "cufoot",

   },
   ["Goilbbl"] = {

name1 = "billion barrels", name2 = "billion barrels", symbol = "Gbbl", utype = "volume", scale = 158987294.928, default = "v * 1.58987294928 < 10 ! e6 ! e9 ! m3", link = "Barrel (unit)#Oil barrel",

   },
   ["gr water"] = {

name1 = "grains water", name2 = "grains water", symbol = "gr H₂O", utype = "volume", scale = 0.00000006479891, default = "cm3", link = "Grain (unit)",

   },
   ["grt"] = {

name1 = "gross register ton", symbol = "grt", utype = "volume", scale = 2.8316846592, default = "m3", link = "Gross register tonnage",

   },
   ["impbbl"] = {

name1 = "imperial barrel", symbol = "imp bbl", utype = "volume", scale = 0.16365924, default = "l impgal USgal", link = "Barrel (unit)",

   },
   ["impbsh"] = {

name1 = "imperial bushel", symbol = "imp bsh", utype = "volume", scale = 0.03636872, default = "l impgal USdrygal",

   },
   ["impbu"] = {

name1 = "imperial bushel", symbol = "imp bu", utype = "volume", scale = 0.03636872, default = "m3",

   },
   ["impgal"] = {

name1 = "imperial gallon", symbol = "imp gal", utype = "volume", scale = 0.00454609, default = "l USgal",

   },
   ["impgi"] = {

name1 = "gill", symbol = "gi", utype = "volume", scale = 0.0001420653125, default = "ml USoz", link = "Gill (unit)",

   },
   ["impkenning"] = {

name1 = "imperial kenning", symbol = "kenning", utype = "volume", scale = 0.01818436, default = "l USdrygal", link = "Kenning (unit)",

   },
   ["impoz"] = {

name1 = "imperial fluid ounce", symbol = "imp fl oz", utype = "volume", scale = 0.0000284130625, default = "ml USoz",

   },
   ["imppk"] = {

name1 = "imperial peck", symbol = "pk", utype = "volume", scale = 0.00909218, default = "l USdrygal", link = "Peck",

   },
   ["imppt"] = {

name1 = "imperial pint", symbol = "imp pt", utype = "volume", scale = 0.00056826125, default = "l",

   },
   ["impqt"] = {

name1 = "imperial quart", symbol = "imp qt", utype = "volume", scale = 0.0011365225, default = "ml USoz", customary= 3,

   },
   ["kilderkin"] = {

symbol = "kilderkin", usename = 1, utype = "volume", scale = 0.08182962, default = "l impgal USgal",

   },
   ["koilbbl"] = {

name1 = "thousand barrels", name2 = "thousand barrels", symbol = "kbbl", utype = "volume", scale = 158.987294928, default = "v * 1.58987294928 < 10 ! ! e3 ! m3", link = "Barrel (unit)#Oil barrel",

   },
   ["L"] = {

_name1 = "litre", _name1_us= "liter", _symbol = "L", utype = "volume", scale = 0.001, prefixes = 1, default = "impgal USgal", link = "Litre",

   },
   ["l"] = {

_name1 = "litre", _name1_us= "liter", _symbol = "l", utype = "volume", scale = 0.001, prefixes = 1, default = "impgal USgal", link = "Litre",

   },
   ["m3"] = {

_name1 = "cubic metre", _name1_us= "cubic meter", _symbol = "m³", prefix_position= 7, utype = "volume", scale = 1, prefixes = 3, default = "cuft", link = "Cubic metre",

   },
   ["Mbbl"] = {

name1 = "thousand barrels", name2 = "thousand barrels", symbol = "Mbbl", utype = "volume", scale = 158.987294928, default = "v * 1.58987294928 < 10 ! e3 ! ! m3", link = "Barrel (unit)#Oil barrel",

   },
   ["MMoilbbl"] = {

name1 = "million barrels", name2 = "million barrels", symbol = "MMbbl", utype = "volume", scale = 158987.294928, default = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3", link = "Barrel (unit)#Oil barrel",

   },
   ["Moilbbl"] = {

name1 = "million barrels", name2 = "million barrels", symbol = "Mbbl", utype = "volume", scale = 158987.294928, default = "v * 1.58987294928 < 10 ! e3 ! e6 ! m3", link = "Barrel (unit)#Oil barrel",

   },
   ["MTON"] = {

name1 = "measurement ton", symbol = "MTON", utype = "volume", scale = 1.13267386368, default = "m3",

   },
   ["MUSgal"] = {

name1 = "million US gallons", name1_us = "million U.S. gallons", name2 = "million US gallons", name2_us = "million U.S. gallons", symbol = "million US gal", sym_us = "million U.S. gal", utype = "volume", scale = 3785.411784, default = "Ml", link = "US gallon",

   },
   ["oilbbl"] = {

name1 = "barrel", symbol = "bbl", utype = "volume", scale = 0.158987294928, default = "m3", link = "Barrel (unit)#Oil barrel",

   },
   ["stere"] = {

symbol = "stere", usename = 1, utype = "volume", scale = 1, default = "cuft",

   },
   ["Toilbbl"] = {

name1 = "trillion barrels", name2 = "trillion barrels", symbol = "Tbbl", utype = "volume", scale = 158987294928, default = "v * 1.58987294928 < 10 ! e9 ! e12 ! m3", link = "Barrel (unit)#Oil barrel",

   },
   ["USbbl"] = {

name1 = "US barrel", name1_us = "U.S. barrel", symbol = "US bbl", sym_us = "U.S. bbl", utype = "volume", scale = 0.119240471196, default = "l USgal impgal", link = "Barrel (unit)",

   },
   ["USbeerbbl"] = {

name1 = "US beer barrel", name1_us = "U.S. beer barrel", symbol = "US bbl", sym_us = "U.S. bbl", utype = "volume", scale = 0.117347765304, default = "l USgal impgal", link = "Barrel (unit)",

   },
   ["USbsh"] = {

name1 = "US bushel", name1_us = "U.S. bushel", symbol = "US bsh", sym_us = "U.S. bsh", utype = "volume", scale = 0.03523907016688, default = "l USdrygal impgal", link = "Bushel",

   },
   ["USbu"] = {

name1 = "US bushel", name1_us = "U.S. bushel", symbol = "US bu", sym_us = "U.S. bu", utype = "volume", scale = 0.03523907016688, default = "l USdrygal impgal", link = "Bushel",

   },
   ["USdrybbl"] = {

name1 = "US dry barrel", name1_us = "U.S. dry barrel", symbol = "US dry bbl", sym_us = "U.S. dry bbl", utype = "volume", scale = 0.11562819898508, default = "m3", link = "Barrel (unit)",

   },
   ["USdrygal"] = {

name1 = "US dry gallon", name1_us = "U.S. dry gallon", symbol = "US dry gal", sym_us = "U.S. dry gal", utype = "volume", scale = 0.00440488377086, default = "l", link = "Gallon",

   },
   ["USdrypt"] = {

name1 = "US dry pint", name1_us = "U.S. dry pint", symbol = "US dry pt", sym_us = "U.S. dry pt", utype = "volume", scale = 0.0005506104713575, default = "ml", link = "Pint",

   },
   ["USdryqt"] = {

name1 = "US dry quart", name1_us = "U.S. dry quart", symbol = "US dry qt", sym_us = "U.S. dry qt", utype = "volume", scale = 0.001101220942715, default = "ml", link = "Quart",

   },
   ["USflgal"] = {

name1 = "US gallon", name1_us = "U.S. gallon", symbol = "US fl gal", sym_us = "U.S. fl gal", utype = "volume", scale = 0.003785411784, default = "l impgal", link = "Gallon",

   },
   ["USgal"] = {

name1 = "US gallon", name1_us = "U.S. gallon", symbol = "US gal", sym_us = "U.S. gal", utype = "volume", scale = 0.003785411784, default = "l impgal",

   },
   ["USgi"] = {

name1 = "gill", symbol = "gi", utype = "volume", scale = 0.0001182941183, default = "ml impoz", link = "Gill (unit)",

   },
   ["USkenning"] = {

name1 = "US kenning", name1_us = "U.S. kenning", symbol = "US kenning", sym_us = "U.S. kenning", utype = "volume", scale = 0.01761953508344, default = "l impgal", link = "Kenning (unit)",

   },
   ["USmin"] = {

name1 = "US minim", name1_us = "U.S. minim", symbol = "US min", sym_us = "U.S. min", utype = "volume", scale = 0.000000061611519921875, default = "ml", link = "Minim (unit)",

   },
   ["USoz"] = {

name1 = "US fluid ounce", name1_us = "U.S. fluid ounce", symbol = "US fl oz", sym_us = "U.S. fl oz", utype = "volume", scale = 0.0000295735295625, default = "ml",

   },
   ["USpk"] = {

name1 = "US peck", name1_us = "U.S. peck", symbol = "US pk", sym_us = "U.S. pk", utype = "volume", scale = 0.00880976754172, default = "l impgal", link = "Peck",

   },
   ["USpt"] = {

name1 = "US pint", name1_us = "U.S. pint", symbol = "US pt", sym_us = "U.S. pt", utype = "volume", scale = 0.000473176473, default = "l imppt", link = "Pint",

   },
   ["USqt"] = {

name1 = "US quart", name1_us = "U.S. quart", symbol = "US qt", sym_us = "U.S. qt", utype = "volume", scale = 0.000946352946, default = "ml", link = "Quart", customary= 1,

   },
   ["USquart"] = {

name1 = "US quart", name1_us = "U.S. quart", symbol = "US qt", sym_us = "U.S. qt", utype = "volume", scale = 0.000946352946, default = "ml impoz", link = "Quart",

   },
   ["UStbsp"] = {

name1 = "US tablespoon", name1_us = "U.S. tablespoon", symbol = "US tbsp", sym_us = "U.S. tbsp", utype = "volume", scale = 1.4786764781250001e-5, default = "ml",

   },
   ["winecase"] = {

symbol = "case", usename = 1, utype = "volume", scale = 0.009, default = "l", link = "Case (goods)",

   },
   ["*U.S.drygal"] = {

target = "USdrygal", sp_us = true, customary= 2,

   },
   ["*U.S.gal"] = {

target = "USgal", sp_us = true, default = "L impgal", customary= 2,

   },
   ["+USdrygal"] = {

target = "USdrygal", customary= 1,

   },
   ["+usfloz"] = {

target = "USoz", link = "Fluid ounce", customary= 1,

   },
   ["+USgal"] = {

target = "USgal", customary= 1,

   },
   ["+USoz"] = {

target = "USoz", customary= 1,

   },
   ["@impgal"] = {

target = "impgal", link = "Gallon", customary= 3,

   },
   ["acre feet"] = {

target = "acre ft",

   },
   ["acre-feet"] = {

target = "acre ft",

   },
   ["acre-ft"] = {

target = "acre ft",

   },
   ["acre.foot"] = {

target = "acre foot",

   },
   ["acre.ft"] = {

target = "acre ft",

   },
   ["acre·ft"] = {

target = "acre ft",

   },
   ["bushels"] = {

target = "USbsh",

   },
   ["cid"] = {

target = "CID",

   },
   ["ft3"] = {

target = "cuft",

   },
   ["gal"] = {

target = "USgal",

   },
   ["gallon"] = {

shouldbe = "Use %{USgal%} for US gallons or %{impgal%} for imperial gallons (not %{gallon%})",

   },
   ["gallons"] = {

shouldbe = "Use %{USgal%} for US gallons or %{impgal%} for imperial gallons (not %{gallons%})",

   },
   ["Gcuft"] = {

target = "e9cuft",

   },
   ["impfloz"] = {

target = "impoz",

   },
   ["Impgal"] = {

target = "impgal",

   },
   ["in3"] = {

target = "cuin", symbol = "in³",

   },
   ["kcuft"] = {

target = "e3cuft",

   },
   ["kcum"] = {

target = "e3m3",

   },
   ["km³"] = {

target = "km3",

   },
   ["liter"] = {

target = "L", sp_us = true,

   },
   ["liters"] = {

target = "L", sp_us = true,

   },
   ["litre"] = {

target = "L",

   },
   ["litres"] = {

target = "L",

   },
   ["Mcuft"] = {

target = "e6cuft",

   },
   ["Mcum"] = {

target = "e6m3",

   },
   ["Mft3"] = {

target = "e6cuft",

   },
   ["mi3"] = {

target = "cumi",

   },
   ["m³"] = {

target = "m3",

   },
   ["Pcuft"] = {

target = "e15cuft",

   },
   ["pt"] = {

shouldbe = "Use %{USpt%} for US pints or %{imppt%} for imperial pints (not %{pt%})",

   },
   ["qt"] = {

shouldbe = "Use %{USqt%} for US quarts or %{impqt%} for imperial quarts (not %{qt%})",

   },
   ["Tcuft"] = {

target = "e12cuft",

   },
   ["Tft3"] = {

target = "e12cuft",

   },
   ["U.S.bbl"] = {

target = "USbbl", sp_us = true, default = "l U.S.gal impgal",

   },
   ["U.S.beerbbl"] = {

target = "USbeerbbl", sp_us = true, default = "l U.S.gal impgal",

   },
   ["U.S.bsh"] = {

target = "USbsh", sp_us = true, default = "l U.S.drygal impgal",

   },
   ["U.S.bu"] = {

target = "USbu", sp_us = true, default = "l U.S.drygal impgal",

   },
   ["U.S.drybbl"] = {

target = "USdrybbl", sp_us = true,

   },
   ["U.S.drygal"] = {

target = "USdrygal", sp_us = true,

   },
   ["U.S.drypt"] = {

target = "USdrypt", sp_us = true,

   },
   ["U.S.dryqt"] = {

target = "USdryqt", sp_us = true,

   },
   ["U.S.flgal"] = {

target = "USflgal", sp_us = true,

   },
   ["U.S.floz"] = {

target = "USoz", sp_us = true,

   },
   ["U.S.gal"] = {

target = "USgal", sp_us = true, default = "L impgal", link = "U.S. gallon",

   },
   ["u.s.gal"] = {

target = "USgal", sp_us = true, default = "L impgal", link = "U.S. gallon",

   },
   ["U.S.gi"] = {

target = "USgi", sp_us = true,

   },
   ["U.S.kenning"] = {

target = "USkenning", sp_us = true,

   },
   ["U.S.oz"] = {

target = "USoz", sp_us = true,

   },
   ["U.S.pk"] = {

target = "USpk", sp_us = true,

   },
   ["U.S.pt"] = {

target = "USpt", sp_us = true,

   },
   ["U.S.qt"] = {

target = "USqt", sp_us = true, default = "L impqt", customary= 2,

   },
   ["usbbl"] = {

target = "USbbl",

   },
   ["usbeerbbl"] = {

target = "USbeerbbl",

   },
   ["usbsh"] = {

target = "USbsh",

   },
   ["usbu"] = {

target = "USbu",

   },
   ["usdrybbl"] = {

target = "USdrybbl",

   },
   ["usdrygal"] = {

target = "USdrygal",

   },
   ["usdrypt"] = {

target = "USdrypt",

   },
   ["usdryqt"] = {

target = "USdryqt",

   },
   ["USfloz"] = {

target = "USoz",

   },
   ["usfloz"] = {

target = "USoz",

   },
   ["USGAL"] = {

target = "USgal",

   },
   ["usgal"] = {

target = "USgal",

   },
   ["usgi"] = {

target = "USgi",

   },
   ["uskenning"] = {

target = "USkenning",

   },
   ["usoz"] = {

target = "USoz",

   },
   ["uspk"] = {

target = "USpk",

   },
   ["uspt"] = {

target = "USpt",

   },
   ["usqt"] = {

target = "USqt",

   },
   ["yd3"] = {

target = "cuyd",

   },
   ["cuft/sqmi"] = {

per = { "cuft", "sqmi" }, utype = "volume per unit area", default = "m3/km2",

   },
   ["m3/ha"] = {

name1 = "cubic metre per hectare", name1_us = "cubic meter per hectare", name2 = "cubic metres per hectare", name2_us = "cubic meters per hectare", symbol = "m³/ha", utype = "volume per unit area", scale = 0.0001, default = "USbu/acre", link = "Hectare",

   },
   ["m3/km2"] = {

per = { "m3", "km2" }, utype = "volume per unit area", default = "cuft/sqmi",

   },
   ["U.S.gal/acre"] = {

per = { "U.S.gal", "acre" }, utype = "volume per unit area", default = "m3/km2",

   },
   ["USbu/acre"] = {

name2 = "US bushels per acre", symbol = "US bushel per acre", usename = 1, utype = "volume per unit area", scale = 8.7077638761350888e-6, default = "m3/ha", link = "Bushel",

   },
   ["USgal/acre"] = {

per = { "USgal", "acre" }, utype = "volume per unit area", default = "m3/km2",

   },
   ["cuyd/mi"] = {

per = { "cuyd", "mi" }, utype = "volume per unit length", default = "m3/km",

   },
   ["m3/km"] = {

per = { "m3", "km" }, utype = "volume per unit length", default = "cuyd/mi",

   },
   ["mich"] = {

combination= { "ch", "mi" }, multiple = { 80 }, utype = "length",

   },
   ["michlk"] = {

combination= { "chlk", "mi" }, multiple = { 80 }, utype = "length",

   },
   ["michainlk"] = {

combination= { "chainlk", "mi" }, multiple = { 80 }, utype = "length",

   },
   ["miydftin"] = {

combination= { "in", "ft", "yd", "mi" }, multiple = { 12, 3, 1760 }, utype = "length",

   },
   ["mift"] = {

combination= { "ft", "mi" }, multiple = { 5280 }, utype = "length",

   },
   ["ydftin"] = {

combination= { "in", "ft", "yd" }, multiple = { 12, 3 }, utype = "length",

   },
   ["ydft"] = {

combination= { "ft", "yd" }, multiple = { 3 }, utype = "length",

   },
   ["ftin"] = {

combination= { "in", "ft" }, multiple = { 12 }, utype = "length",

   },
   ["footin"] = {

combination= { "in", "foot" }, multiple = { 12 }, utype = "length",

   },
   ["handin"] = {

combination= { "in", "hand" }, multiple = { 4 }, utype = "length",

   },
   ["lboz"] = {

combination= { "oz", "lb" }, multiple = { 16 }, utype = "mass",

   },
   ["stlb"] = {

combination= { "lb", "st" }, multiple = { 14 }, utype = "mass",

   },
   ["stlboz"] = {

combination= { "oz", "lb", "st" }, multiple = { 16, 14 }, utype = "mass",

   },
   ["st and lb"] = {

combination= { "lb", "st" }, multiple = { 14 }, utype = "mass",

   },
   ["GN LTf"] = {

combination= { "GN", "-LTf" }, utype = "force",

   },
   ["GN LTf STf"] = {

combination= { "GN", "-LTf", "-STf" }, utype = "force",

   },
   ["GN STf"] = {

combination= { "GN", "-STf" }, utype = "force",

   },
   ["GN STf LTf"] = {

combination= { "GN", "-STf", "-LTf" }, utype = "force",

   },
   ["kN LTf"] = {

combination= { "kN", "-LTf" }, utype = "force",

   },
   ["kN LTf STf"] = {

combination= { "kN", "-LTf", "-STf" }, utype = "force",

   },
   ["kN STf"] = {

combination= { "kN", "-STf" }, utype = "force",

   },
   ["kN STf LTf"] = {

combination= { "kN", "-STf", "-LTf" }, utype = "force",

   },
   ["LTf STf"] = {

combination= { "-LTf", "-STf" }, utype = "force",

   },
   ["MN LTf"] = {

combination= { "MN", "-LTf" }, utype = "force",

   },
   ["MN LTf STf"] = {

combination= { "MN", "-LTf", "-STf" }, utype = "force",

   },
   ["MN STf"] = {

combination= { "MN", "-STf" }, utype = "force",

   },
   ["MN STf LTf"] = {

combination= { "MN", "-STf", "-LTf" }, utype = "force",

   },
   ["STf LTf"] = {

combination= { "-STf", "-LTf" }, utype = "force",

   },
   ["L/100 km mpgimp"] = {

combination= { "L/100 km", "mpgimp" }, utype = "fuel efficiency",

   },
   ["l/100 km mpgimp"] = {

combination= { "l/100 km", "mpgimp" }, utype = "fuel efficiency",

   },
   ["L/100 km mpgUS"] = {

combination= { "L/100 km", "mpgus" }, utype = "fuel efficiency",

   },
   ["L/100 km mpgus"] = {

combination= { "L/100 km", "mpgus" }, utype = "fuel efficiency",

   },
   ["l/100 km mpgus"] = {

combination= { "l/100 km", "mpgus" }, utype = "fuel efficiency",

   },
   ["mpgimp L/100 km"] = {

combination= { "mpgimp", "L/100 km" }, utype = "fuel efficiency",

   },
   ["LT ST t"] = {

combination= { "lt", "-ST", "t" }, utype = "mass",

   },
   ["LT t ST"] = {

combination= { "lt", "t", "-ST" }, utype = "mass",

   },
   ["ST LT t"] = {

combination= { "-ST", "lt", "t" }, utype = "mass",

   },
   ["ST t LT"] = {

combination= { "-ST", "t", "lt" }, utype = "mass",

   },
   ["t LT ST"] = {

combination= { "t", "lt", "-ST" }, utype = "mass",

   },
   ["ton"] = {

combination= { "LT", "ST" }, utype = "mass",

   },
   ["kPa kg/cm2"] = {

combination= { "kPa", "kgf/cm2" }, utype = "pressure",

   },
   ["kPa lb/in2"] = {

combination= { "kPa", "-lb/in2" }, utype = "pressure",

   },
   ["floz"] = {

combination= { "impoz", "USoz" }, utype = "volume",

   },

}

---

-- Do not change the data in this table because it is created by running -- -- a script that reads the wikitext from a wiki page (see note above). --

---

local default_exceptions = { -- Prefixed units with a default different from that of the base unit. -- Each key item is a prefixed symbol (unitcode for engineering notation). ["cm²"] = "sqin", ["dm²"] = "sqin", ["e3acre"] = "km2", ["e3m2"] = "e6sqft", ["e6acre"] = "km2", ["e6ha"] = "e6acre", ["e6km2"] = "e6sqmi", ["e6m2"] = "e6sqft", ["e6sqft"] = "v * 9.290304 < 100 ! e3 ! e6 ! m2", ["e6sqmi"] = "e6km2", ["hm²"] = "acre", ["km²"] = "sqmi", ["mm²"] = "sqin", ["aJ"] = "eV", ["e3BTU"] = "MJ", ["e6BTU"] = "GJ", ["EJ"] = "kWh", ["fJ"] = "keV", ["GJ"] = "kWh", ["MJ"] = "kWh", ["PJ"] = "kWh", ["pJ"] = "MeV", ["TJ"] = "kWh", ["YJ"] = "kWh", ["yJ"] = "μeV", ["ZJ"] = "kWh", ["zJ"] = "meV", ["e12cuft/a"] = "v * 2.8316846592 < 100 ! e9 ! e12 ! m3/a", ["e12cuft/d"] = "v * 2.8316846592 < 100 ! e9 ! e12 ! m3/d", ["e12m3/a"] = "Tcuft/a", ["e12m3/d"] = "Tcuft/d", ["e3cuft/a"] = "v * 2.8316846592 < 100 ! ! e3 ! m3/a", ["e3cuft/d"] = "v * 2.8316846592 < 100 ! ! e3 ! m3/d", ["e3cuft/s"] = "v * 2.8316846592 < 100 ! ! e3 ! m3/s", ["e3m3/a"] = "v < 28.316846592 ! k ! M ! cuft/a", ["e3m3/d"] = "v < 28.316846592 ! k ! M ! cuft/d", ["e3m3/s"] = "v < 28.316846592 ! k ! M ! cuft/s", ["e3USgal/a"] = "v * 3.785411784 < 1000 ! ! e3 ! m3/a", ["e6cuft/a"] = "v * 2.8316846592 < 100 ! e3 ! e6 ! m3/a", ["e6cuft/d"] = "v * 2.8316846592 < 100 ! e3 ! e6 ! m3/d", ["e6cuft/s"] = "v * 2.8316846592 < 100 ! e3 ! e6 ! m3/s", ["e6m3/a"] = "v < 28.316846592 ! M ! G ! cuft/a", ["e6m3/d"] = "v < 28.316846592 ! M ! G ! cuft/d", ["e6m3/s"] = "v < 28.316846592 ! e6 ! e9 ! cuft/s", ["e6USgal/a"] = "v * 3.785411784 < 1000 ! e3 ! e6 ! m3/a", ["e9cuft/a"] = "m3/a", ["e9cuft/d"] = "v * 2.8316846592 < 100 ! e6 ! e9 ! m3/d", ["e9m3/a"] = "v < 28.316846592 ! G ! T ! cuft/a", ["e9m3/d"] = "v < 28.316846592 ! G ! T ! cuft/d", ["e9m3/s"] = "v < 28.316846592 ! e9 ! e12 ! cuft/s", ["e9USgal/a"] = "v * 3.785411784 < 1000 ! e6 ! e9 ! m3/a", ["e9USgal/s"] = "v * 3.785411784 < 1000 ! e6 ! e9 ! m3/s", ["nN"] = "gr-f", ["μN"] = "gr-f", ["mN"] = "oz-f", ["am"] = "in", ["cm"] = "in", ["dam"] = "ft", ["dm"] = "in", ["e12km"] = "e12mi", ["e12mi"] = "e12km", ["e3AU"] = "ly", ["e3km"] = "e3mi", ["e3mi"] = "e3km", ["e6km"] = "e6mi", ["e6mi"] = "e6km", ["e9km"] = "AU", ["e9mi"] = "e9km", ["Em"] = "mi", ["fm"] = "in", ["Gm"] = "mi", ["hm"] = "ft", ["km"] = "mi", ["mm"] = "in", ["Mm"] = "mi", ["nm"] = "in", ["Pm"] = "mi", ["pm"] = "in", ["Tm"] = "mi", ["Ym"] = "mi", ["ym"] = "in", ["Zm"] = "mi", ["zm"] = "in", ["μm"] = "in", ["e12lb"] = "v * 4.5359237 < 10 ! Mt ! Gt", ["e3lb"] = "v * 4.5359237 < 10 ! kg ! t", ["e3ozt"] = "v * 0.311034768 < 10 ! kg ! t", ["e3t"] = "LT ST", ["e6carat"] = "t", ["e6lb"] = "v * 4.5359237 < 10 ! t ! kilotonne", ["e6ozt"] = "lb kg", ["e6ST"] = "Mt", ["e6t"] = "LT ST", ["e9lb"] = "v * 4.5359237 < 10 ! kilotonne ! Mt", ["e9t"] = "LT ST", ["Gg"] = "lb", ["kg"] = "lb", ["mg"] = "gr", ["Mg"] = "LT ST", ["ng"] = "gr", ["μg"] = "gr", ["mBq"] = "fCi", ["kBq"] = "nCi", ["MBq"] = "μCi", ["GBq"] = "mCi", ["TBq"] = "Ci", ["PBq"] = "kCi", ["EBq"] = "kCi", ["fCi"] = "mBq", ["pCi"] = "Bq", ["nCi"] = "Bq", ["μCi"] = "kBq", ["mCi"] = "MBq", ["kCi"] = "TBq", ["MCi"] = "PBq", ["ns"] = "μs", ["μs"] = "ms", ["ms"] = "s", ["ks"] = "h", ["Ms"] = "week", ["Gs"] = "decade", ["Ts"] = "millennium", ["Ps"] = "million year", ["Es"] = "thousand million year", ["MK"] = "keVT", ["cL"] = "impoz usoz", ["cl"] = "impoz usoz", ["cm³"] = "cuin", ["dL"] = "impoz usoz", ["dl"] = "impoz usoz", ["mm³"] = "cuin", ["dm³"] = "cuin", ["e12cuft"] = "v * 2.8316846592 < 100 ! e9 ! e12 ! m3", ["e12impgal"] = "v * 4.54609 < 1000 ! T ! P ! l", ["e12m3"] = "v < 28.316846592 ! T ! P ! cuft", ["e12U.S.gal"] = "v * 3.785411784 < 1000 ! T ! P ! l", ["e12USgal"] = "v * 3.785411784 < 1000 ! T ! P ! l", ["e15cuft"] = "v * 2.8316846592 < 100 ! e12 ! e15 ! m3", ["e15m3"] = "Pcuft", ["e3bdft"] = "v * 0.23597372167 < 100 ! e3 ! e6 ! m3", ["e3cuft"] = "v * 2.8316846592 < 100 ! ! e3 ! m3", ["e3impgal"] = "v * 4.54609 < 1000 ! k ! M ! l", ["e3m3"] = "v < 28.316846592 ! k ! M ! cuft", ["e3U.S.gal"] = "v * 3.785411784 < 1000 ! k ! M ! l", ["e3USgal"] = "v * 3.785411784 < 1000 ! k ! M ! l", ["e6bdft"] = "v * 0.23597372167 < 100 ! e3 ! e6 ! m3", ["e6cuft"] = "v * 2.8316846592 < 100 ! e3 ! e6 ! m3", ["e6cuyd"] = "v * 7.64554857984 < 10 ! e3 ! e6 ! m3", ["e6impgal"] = "v * 4.54609 < 1000 ! M ! G ! l", ["e6L"] = "USgal", ["e6m3"] = "v < 28.316846592 ! M ! G ! cuft", ["e6U.S.gal"] = "v * 3.785411784 < 1000 ! M ! G ! l", ["e6USgal"] = "v * 3.785411784 < 1000 ! M ! G ! l", ["e9bdft"] = "v * 0.23597372167 < 100 ! e6 ! e9 ! m3", ["e9cuft"] = "v * 2.8316846592 < 100 ! e6 ! e9 ! m3", ["e9impgal"] = "v * 4.54609 < 1000 ! G ! T ! l", ["e9m3"] = "v < 28.316846592 ! G ! T ! cuft", ["e9U.S.gal"] = "v * 3.785411784 < 1000 ! G ! T ! l", ["e9USgal"] = "v * 3.785411784 < 1000 ! G ! T ! l", ["GL"] = "cuft", ["Gl"] = "cuft", ["kL"] = "cuft", ["kl"] = "cuft", ["km³"] = "cumi", ["mL"] = "impoz usoz", ["ml"] = "impoz usoz", ["Ml"] = "v < 28.316846592 ! e3 ! e6 ! cuft", ["ML"] = "v < 28.316846592 ! e3 ! e6 ! cuft", ["TL"] = "cumi", ["Tl"] = "cumi", ["μL"] = "cuin", ["μl"] = "cuin", }

---

-- Do not change the data in this table because it is created by running -- -- a script that reads the wikitext from a wiki page (see note above). --

---

local link_exceptions = { -- Prefixed units with a linked article different from that of the base unit. -- Each key item is a prefixed symbol (not unitcode). ["mm²"] = "Square millimetre", ["cm²"] = "Square centimetre", ["dm²"] = "Square decimetre", ["km²"] = "Square kilometre", ["kJ"] = "Kilojoule", ["MJ"] = "Megajoule", ["fm"] = "Femtometre", ["pm"] = "Picometre", ["nm"] = "Nanometre", ["μm"] = "Micrometre", ["mm"] = "Millimetre", ["cm"] = "Centimetre", ["dm"] = "Decimetre", ["dam"] = "Decametre", ["hm"] = "Hectometre", ["km"] = "Kilometre", ["Mm"] = "Megametre", ["Gm"] = "Gigametre", ["Tm"] = "Terametre", ["Pm"] = "Petametre", ["Em"] = "Exametre", ["Zm"] = "Zettametre", ["Ym"] = "Yottametre", ["μg"] = "Microgram", ["mg"] = "Milligram", ["kg"] = "Kilogram", ["Mg"] = "Tonne", ["yW"] = "Yoctowatt", ["zW"] = "Zeptowatt", ["aW"] = "Attowatt", ["fW"] = "Femtowatt", ["pW"] = "Picowatt", ["nW"] = "Nanowatt", ["μW"] = "Microwatt", ["mW"] = "Milliwatt", ["kW"] = "Kilowatt", ["MW"] = "Megawatt", ["GW"] = "Gigawatt", ["TW"] = "Terawatt", ["PW"] = "Petawatt", ["EW"] = "Exawatt", ["ZW"] = "Zettawatt", ["YW"] = "Yottawatt", ["as"] = "Attosecond", ["fs"] = "Femtosecond", ["ps"] = "Picosecond", ["ns"] = "Nanosecond", ["μs"] = "Microsecond", ["ms"] = "Millisecond", ["ks"] = "Kilosecond", ["Ms"] = "Megasecond", ["Gs"] = "Gigasecond", ["Ts"] = "Terasecond", ["Ps"] = "Petasecond", ["Es"] = "Exasecond", ["Zs"] = "Zettasecond", ["Ys"] = "Yottasecond", ["mm³"] = "Cubic millimetre", ["cm³"] = "Cubic centimetre", ["dm³"] = "Cubic decimetre", ["dam³"] = "Cubic decametre", ["km³"] = "Cubic kilometre", ["μL"] = "Microlitre", ["μl"] = "Microlitre", ["mL"] = "Millilitre", ["ml"] = "Millilitre", ["cL"] = "Centilitre", ["cl"] = "Centilitre", ["dL"] = "Decilitre", ["dl"] = "Decilitre", ["daL"] = "Decalitre", ["dal"] = "Decalitre", ["hL"] = "Hectolitre", ["hl"] = "Hectolitre", ["kL"] = "Kilolitre", ["kl"] = "Kilolitre", ["ML"] = "Megalitre", ["Ml"] = "Megalitre", ["GL"] = "Gigalitre", ["Gl"] = "Gigalitre", ["TL"] = "Teralitre", ["Tl"] = "Teralitre", ["PL"] = "Petalitre", ["Pl"] = "Petalitre", }

---

-- Do not change the data in this table because it is created by running -- -- a script that reads the wikitext from a wiki page (see note above). --

---

local per_unit_fixups = { -- Automatically created per units of form "x/y" may have their unit type -- changed, for example, "length/time" is changed to "speed". -- Other adjustments can also be specified. ["/area"] = "per unit area", ["/volume"] = "per unit volume", ["area/area"] = "area per unit area", ["energy/length"] = "energy per unit length", ["energy/mass"] = "energy per unit mass", ["energy/time"] = { utype = "power", link = "Power (physics)" }, ["energy/volume"] = "energy per unit volume", ["force/area"] = { utype = "pressure", link = "Pressure" }, ["length/length"] = { utype = "gradient", link = "Grade (slope)" }, ["length/time"] = { utype = "speed", link = "Speed" }, ["length/time/time"] = { utype = "acceleration", link = "Acceleration" }, ["mass/area"] = { utype = "pressure", multiplier = 9.80665 }, ["mass/length"] = "linear density", ["mass/mass"] = "concentration", ["mass/power"] = "mass per unit power", ["mass/time"] = "mass per unit time", ["mass/volume"] = { utype = "density", link = "Density" }, ["power/mass"] = "power per unit mass", ["power/volume"] = { link = "Power density" }, ["pressure/length"] = "fracture gradient", ["speed/time"] = { utype = "acceleration", link = "Acceleration" }, ["volume/area"] = "volume per unit area", ["volume/length"] = "volume per unit length", ["volume/time"] = "flow", }

return { all_units = all_units, default_exceptions = default_exceptions, link_exceptions = link_exceptions, per_unit_fixups = per_unit_fixups, }